MODUs and the Semi-Submersible Hull
The kinds of mobile offshore drilling unit, and the parts of a semi-submersible hull that the control room operator looks after.
12 min
Activities: 0 of 2
A mobile offshore drilling unit (MODU) is a drilling rig that can move from one well location to another. There are three main kinds:
- Jack-up: a hull that floats while it is towed, then lowers legs to the seabed and lifts itself out of the water. When it drills, the sea does not hold it up.
- Drillship: a ship-shaped hull with a derrick over a hole in the middle, the moonpool.
- Semi-submersible (a "semi", also called a column-stabilised unit): a hull made of pontoons, columns and a deck box, which floats deep in the water while it works.
A drillship and a semi-submersible float all the time. Their weight is held up by the sea, so every tonne loaded, used or moved on board changes how deep they float and how level they sit. Keeping them right is the job of the marine crew, and on a semi much of that work is done from the ballast control room.
The parts of a semi-submersible hull
Why a semi moves gently
When a semi is ballasted down to its operating draught, the pontoons are far below the waves, out of most of the wave action. The waves push only on the slim columns, so the rig heaves, rolls and pitches much less than a ship of the same size. That is why semis are used for drilling in rough seas and in deep water.
The same feature has a cost. Because the water plane is small, a semi sinks a long way for each tonne added, and a weight placed far from the centre can heel it more than people expect. The rig is stable, but it is sensitive. The control room operator must know the rig's condition at all times and act before small changes add up.
Other kinds of offshore installation, such as fixed platforms, tension leg platforms and spars, are compared in the course Offshore Operations Fundamentals. The equipment of a semi-submersible, from the drawworks to the lifeboats, is shown in 3D in the course Offshore Drilling Rig Equipment. This course stays with one job: the ballast and stability watch on a moored semi-submersible. The rig in the examples belongs to an invented company, Delvane Offshore, and its numbers are teaching figures, not those of any real unit.
Match the unit to the way it is held up while drilling
- Jack-up
- Semi-submersible
- Drillship
Why is a semi-submersible sensitive to weight added on deck?