What a Vertical Milling Machine Does

A turning cutter and a table that moves the work under it.

8 min

Activities: 0 of 2

A vertical milling machine (a "mill") shapes metal with a turning cutter. The cutter is held in a spindle that points straight down. The work is clamped to a table and moved under the cutter, left and right, in and out, and up and down. Each tooth of the cutter takes a small chip of metal, called swarf.

This is the opposite of a lathe. On a lathe the work turns and the tool stays still. On a mill the cutter turns and the work is moved into it. The mills in this course are manual turret milling machines, the kind found in most maintenance and training workshops. Computer-controlled (CNC) mills are not covered here.

Common milling jobs

Makes a flat surface on the top of the work.

Why the mill needs respect

A milling cutter has many sharp teeth and turns fast. Small cutters may run at well over a thousand revolutions per minute. A hand that slips near it can be cut badly in an instant. The turning spindle and the drawbar at the top can catch loose clothing or hair. And work that is not clamped firmly can be grabbed by the cutter and thrown.

This course teaches you to recognise these dangers, to follow the safe way of working and to know when to stop. The examples are set in the workshop of an invented company, Brenlow Engineering.

Name the job

Match each milling job to what it does.

  • Face milling
  • Slotting
  • Side milling
  • Drilling

On a vertical milling machine, what turns?

Checking your enrolment…