Maschinenbau
Professionelle Schulungen in Maschinenbau: in Präsenz, live online mit Lehrkraft oder als Inhouse-Schulung bei Ihnen vor Ort.
Kurse
15
Onlinekurse
15
Präsenz- und Inhouse-Kurse
0
Onlinekurse
Maschinenbau
API 653 Storage Tank Inspector Exam Preparation
Independent exam preparation for the API 653 Aboveground Storage Tank Inspector certification, covering tank inspection intervals, shell and bottom…
- Module
- 9 Module
- Lektionen
- 49 Lektionen
- Dauer
- 11 Std. 45 Min.
- Niveau
- Fortgeschritten
Maschinenbau
API 570 Piping Inspector Exam Preparation
Independent exam preparation for the API 570 Authorized Piping Inspector examination: it is not affiliated with or endorsed by the American Petroleum…
- Module
- 10 Module
- Lektionen
- 50 Lektionen
- Dauer
- 11 Std. 39 Min.
- Niveau
- Fortgeschritten
Maschinenbau
API 510 Pressure Vessel Inspector Exam Preparation
Independent preparation for the API 510 Authorized Pressure Vessel Inspector exam, for inspectors and integrity engineers in refineries, gas plants…
- Module
- 9 Module
- Lektionen
- 49 Lektionen
- Dauer
- 11 Std. 58 Min.
- Niveau
- Fortgeschritten
Maschinenbau
Reliability Engineering Fundamentals
The core methods of reliability engineering for maintenance, reliability and asset engineers in oil and gas, petrochemical and heavy industry. Learn…
- Module
- 7 Module
- Lektionen
- 35 Lektionen
- Dauer
- 7 Std. 34 Min.
- Niveau
- Mittelstufe
Maschinenbau
Corrosion Management and Inspection
A practical course for integrity, inspection, maintenance and process staff on oil and gas and process facilities. It covers how corrosion works and…
- Module
- 7 Module
- Lektionen
- 39 Lektionen
- Dauer
- 8 Std. 15 Min.
- Niveau
- Mittelstufe
Maschinenbau
Vibration Analysis and Condition Monitoring
Detecting machine faults before they become failures. Covers vibration measurement and units, the frequency spectrum and what each peak means, fault…
- Module
- 8 Module
- Lektionen
- 42 Lektionen
- Dauer
- 9 Std. 32 Min.
- Niveau
- Fortgeschritten
Maschinenbau
Shaft Alignment and Balancing
Two of the highest-return skills in rotating equipment maintenance. Covers misalignment types and their cost, pre-alignment checks including soft…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 5 Std. 57 Min.
- Niveau
- Mittelstufe
Maschinenbau
Pressure Vessels and Heat Exchangers
Separators, drums, columns and exchangers in oil and gas service. Covers vessel design and construction, internals and separation, exchanger types…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 5 Std. 56 Min.
- Niveau
- Mittelstufe
Maschinenbau
Positive Displacement and Reciprocating Pumps
Pumps that move a fixed volume per stroke or revolution, and why they behave nothing like centrifugal pumps. Covers reciprocating and rotary types,…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 5 Std. 54 Min.
- Niveau
- Mittelstufe
Maschinenbau
Piping Systems and Joint Integrity
Process piping from specification to leak-free assembly. Covers pipe sizing, schedules and materials, supports and stress, flange types and gaskets,…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 6 Std.
- Niveau
- Mittelstufe
Maschinenbau
Mechanical Seals and Sealing Systems
How mechanical seals work, why they fail, and how to select and support them. Covers seal construction and the fluid film, single and dual…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 5 Std. 56 Min.
- Niveau
- Mittelstufe
Maschinenbau
Industrial Valves: Selection and Maintenance
The valves that make up a process plant: gate, globe, ball, butterfly, plug, check and relief. Covers how each type works and where it belongs,…
- Module
- 6 Module
- Lektionen
- 26 Lektionen
- Dauer
- 3 Std. 56 Min.
- Niveau
- Einstieg
Maschinenbau
Gas Compressors: Operation and Maintenance
Centrifugal and reciprocating compressors in oilfield and process service. Covers compression principles, machine types and their duty, surge and…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 5 Std. 58 Min.
- Niveau
- Mittelstufe
Maschinenbau
Centrifugal Pumps: Operation and Maintenance
How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 5 Std. 55 Min.
- Niveau
- Mittelstufe
Maschinenbau
Bearings and Lubrication
Rolling element and plain bearings, how they carry load, and why lubrication decides their life. Covers bearing types and selection, grease and oil…
- Module
- 7 Module
- Lektionen
- 30 Lektionen
- Dauer
- 5 Std. 54 Min.
- Niveau
- Mittelstufe
Schulungen in Maschinenbau für ein ganzes Team?
Wir führen jeden dieser Kurse bei Ihnen vor Ort durch, zugeschnitten auf Ihre Verfahren, Ihre Ausrüstung und Ihre Risiken.