Mechanical Maintenance Technician

Kurse in diesem Programm

Diese Reihenfolge empfehlen wir. Sie können mit jedem Kurs beginnen.

1. 1
   Online, im eigenen TempoMaschinenbau

   Centrifugal Pumps: Operation and Maintenance

   How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and cavitation, operating away from best efficiency point, alignment and…

   5 Std. 55 Min.Kostenlos
2. 2
   Online, im eigenen TempoMaschinenbau

   Industrial Valves: Selection and Maintenance

   The valves that make up a process plant: gate, globe, ball, butterfly, plug, check and relief. Covers how each type works and where it belongs, pressure and temperature ratings, actuation, and the inspection, testing…

   3 Std. 56 Min.Kostenlos
3. 3
   Online, im eigenen TempoMaschinenbau

   Bearings and Lubrication

   Rolling element and plain bearings, how they carry load, and why lubrication decides their life. Covers bearing types and selection, grease and oil fundamentals, correct mounting and handling, and the failure modes a…

   5 Std. 54 Min.Kostenlos
4. 4
   Online, im eigenen TempoMaschinenbau

   Mechanical Seals and Sealing Systems

   How mechanical seals work, why they fail, and how to select and support them. Covers seal construction and the fluid film, single and dual arrangements, API seal flush plans, gaskets and static sealing, and diagnosing…

   5 Std. 56 Min.Kostenlos
5. 5
   Online, im eigenen TempoMaschinenbau

   Shaft Alignment and Balancing

   Two of the highest-return skills in rotating equipment maintenance. Covers misalignment types and their cost, pre-alignment checks including soft foot and pipe strain, dial indicator and laser methods, thermal growth…

   5 Std. 57 Min.Kostenlos
6. 6
   Online, im eigenen TempoMaschinenbau

   Vibration Analysis and Condition Monitoring

   Detecting machine faults before they become failures. Covers vibration measurement and units, the frequency spectrum and what each peak means, fault signatures for unbalance, misalignment, looseness and bearing defects,…

   9 Std. 32 Min.Kostenlos
7. 7
   Online, im eigenen TempoMaschinenbau

   Reliability Engineering Fundamentals

   The core methods of reliability engineering for maintenance, reliability and asset engineers in oil and gas, petrochemical and heavy industry. Learn to calculate MTBF, MTTR and availability, read failure patterns and…

   7 Std. 34 Min.Kostenlos

Ein Kurs mit Lehrkraft gilt als abgeschlossen, sobald die Lehrkraft Ihre Teilnahme an seinem Live-Online-Termin vermerkt. Die Teilnahme in Präsenz wird hier noch nicht gezählt.