Instrumentation and Control Technician

Cours de ce programme

C'est l'ordre que nous suggérons. Vous pouvez commencer par n'importe quel cours.

1. 1
   En ligne, à votre rythmeInstrumentation et contrôle

   Instrumentation Fundamentals

   The starting point for instrument technicians and anyone who works with process measurement. Covers measurement terminology and error, signal standards from 4-20 mA to fieldbus, transmitters and smart instruments, P&IDs…

   3 h 57 minGratuit
2. 2
   En ligne, à votre rythmeInstrumentation et contrôle

   Pressure and Level Measurement

   Two of the most common measurements in oil and gas, and the ones most often installed wrongly. Covers pressure sensing technologies and gauge, absolute and differential measurement, hydrostatic level with wet and dry…

   6 h 12 minGratuit
3. 3
   En ligne, à votre rythmeInstrumentation et contrôle

   Temperature Measurement

   Thermocouples, resistance thermometers and non-contact measurement in process service. Covers the physics of each sensor type, thermowells and installation error, wiring and compensation, calibration, and how to…

   5 h 52 minGratuit
4. 4
   En ligne, à votre rythmeInstrumentation et contrôle

   Flow Measurement and Metering

   Flow measurement from orifice plates to Coriolis meters, and the metering systems that determine what a field is paid. Covers differential pressure, positive displacement, turbine, ultrasonic, Coriolis and magnetic…

   9 h 27 minGratuit
5. 5
   En ligne, à votre rythmeInstrumentation et contrôle

   Control Valves and Actuators

   The final control element, where most loop performance is won or lost. Covers valve bodies and trim, flow characteristics and sizing, actuators and fail action, positioners and accessories, cavitation, flashing and…

   5 h 52 minGratuit
6. 6
   En ligne, à votre rythmeInstrumentation et contrôle

   Calibration and Loop Checking

   The discipline behind trustworthy measurement. Covers traceability and uncertainty, test equipment selection, calibration procedures for pressure, temperature, flow and analytical instruments, loop checking and…

   3 h 57 minGratuit
7. 7
   En ligne, à votre rythmeInstrumentation et contrôle

   Process Control Loops and PID Tuning

   Feedback control from first principles to a tuned, stable loop. Covers process dynamics and gain, the PID algorithm and what each term actually does, tuning methods and how to apply them safely, cascade, ratio and…

   9 h 21 minGratuit
8. 8
   En ligne, à votre rythmeInstrumentation et contrôle

   PLC, DCS and SCADA Systems

   Industrial control system architecture and operation. Covers PLC and DCS hardware and scan cycles, programming languages, HMI and alarm management, SCADA and telemetry for distributed assets, industrial networks, and…

   6 h 14 minGratuit

Un cours suivi avec un formateur compte comme terminé dès que le formateur vous marque présent à sa session en direct en ligne. Une participation en présentiel n'est pas encore comptée ici.