iCompetent लोगो
क्लासरूम · प्रशिक्षक के साथMechanical Engineeringमध्यमप्रमाणपत्र

Centrifugal Pumps: Operation and Maintenance

How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and cavitation, operating away from best efficiency point, alignment and installation, and the failure modes that dominate maintenance workload.

मॉड्यूल
7
अधिकतम छात्र
20
भाषा
EN

इसमें आम तौर पर क्या शामिल है

  1. 1

    Orientation: Centrifugal Pumps in the Plant

    • Pump Families and Configurations
    • Reading a Pump Data Sheet and Nameplate
    • Head, Pressure and Power Calculations
    • Working Safely on Pumps
  2. 2

    How a Centrifugal Pump Works

    • Principles and Components
    • The Pump Curve and the System Curve
    • Impeller Trimming and Speed Change
    • Pumps in Parallel and in Series
    • Radial and Axial Thrust
  3. 3

    Suction Conditions and Cavitation

    • NPSH and Cavitation
    • Suction System Design and Priming
    • Calculating NPSH Available
    • Suction Vessels, Sumps and Submergence
    • Diagnosing Cavitation, Recirculation and Gas in the Field
  4. 4

    Maintenance and Failure

    • Installation and Alignment
    • Failure Modes and Monitoring
    • Mechanical Seals and Seal Support Plans
    • Overhaul: Wear Rings, Clearances and Reassembly
  5. 5

    Operating Centrifugal Pumps Well

    • Starting and Stopping a Centrifugal Pump
    • Standby Pumps and Changeovers
    • Flow Control and Energy Use
    • Operator Rounds: Seeing Problems Early
  6. 6

    Troubleshooting and Reliability Improvement

    • A Troubleshooting Method: Pump, System or Measurement?
    • Field Performance Testing and Vibration Signatures
    • Investigating Repeat Seal Failures
    • Bad Actors and Reliability Improvement
  7. 7

    Application and Consolidation

    • Special Duties: Hot, Viscous, Slurry and Volatile Liquids
    • Case Study: The Oversized Pump
    • Common Pump Mistakes and Their Fixes
    • Your Pump Toolkit and Next Steps

यह पेज बताता है कि इस प्रशिक्षण में आम तौर पर क्या शामिल होता है। हर प्रशिक्षण प्रदाता समूह के अनुसार सामग्री, अवधि और क्रम बदल सकता है। बुक करने से पहले प्रशिक्षण प्रदाता से अंतिम सामग्री की पुष्टि करें।

कोड
प्रकार
क्लासरूम
मॉड्यूल
7
कौशल स्तर
मध्यम
भाषा
EN
अधिकतम छात्र
20
प्रमाणपत्र
हाँ
मूल्यांकन
नहीं

अपनी गति से सीखना पसंद है?

यही विषय एक ऑनलाइन कोर्स में, जिसे आप आज ही शुरू कर सकते हैं।

मैकेनिकल इंजीनियरिंग में और कोर्स

इसी विषय के प्रशिक्षक वाले अन्य कोर्स।

समीक्षाएँ

Centrifugal Pumps: Operation and Maintenance के बारे में शिक्षार्थी क्या कहते हैं।

अभी कोई समीक्षा नहीं

सबसे पहले बताएँ कि Centrifugal Pumps: Operation and Maintenance कैसा था।

समीक्षा लिखने के लिए साइन इन करें। दिखाने से पहले हम हर समीक्षा जाँचते हैं।

अभी बुक करें

क्या यही वह है जिसकी आपको तलाश थी?

अपने पसंदीदा स्थान पर कोर्स और सीटों की उपलब्धता जाँचने के लिए हमारी टीम से संपर्क करें

अभी बुक करें
Image for the book now section