iCompetent logosu
Sınıf içi · EğitmenliMechanical EngineeringOrtaSertifika

Corrosion Management and Inspection

A practical course for integrity, inspection, maintenance and process staff on oil and gas and process facilities. It covers how corrosion works and the forms it takes, including CO2, H2S and oxygen corrosion; how to calculate corrosion rates, remaining life and corrosion allowance; and how coatings, cathodic protection, chemical treatment, monitoring and inspection are combined in a corrosion management system. It also covers risk-based inspection, the API inspection codes and fitness-for-service, and how to manage findings through to close-out.

Modüller
7
En fazla katılımcı
20
Dil
EN

Genellikle neleri kapsar

  1. 1

    Why Corrosion Matters and How It Works

    • Corrosion, Cost and Loss of Containment
    • The Electrochemical Corrosion Cell
    • Oxidation and Reduction Reactions in Practice
    • Factors That Control Corrosion Rate
    • Corrosion Rate Units and Measuring Metal Loss
  2. 2

    Forms of Corrosion: Metal Loss

    • Uniform Corrosion and Pitting
    • Crevice and Galvanic Corrosion
    • Erosion-Corrosion and Under-Deposit Corrosion
    • Corrosion Under Insulation (CUI)
    • Microbiologically Influenced Corrosion (MIC)
  3. 3

    Cracking and Oil and Gas Environments

    • Stress Corrosion Cracking and Chloride SCC
    • CO2 (Sweet) Corrosion
    • H2S Sour Service: SSC, HIC and SOHIC
    • Materials for Sour Service: NACE MR0175/ISO 15156
    • Oxygen Corrosion in Water Injection Systems
  4. 4

    Corrosion Rates, Remaining Life and the Corrosion Management System

    • Calculating Corrosion Rates from Thickness Data
    • Remaining Life and Inspection Intervals
    • Corrosion Allowance and Inhibitor Availability
    • The Corrosion Management System
    • Corrosion Risk Assessment and Barriers
    • Corrosion KPIs and the Review Cycle
  5. 5

    Prevention and Control Barriers

    • Materials Selection for Corrosion Control
    • Protective Coatings: Preparation, Systems and Inspection
    • Cathodic Protection: Sacrificial and Impressed Current
    • Cathodic Protection Surveys in Principle
    • Chemical Treatment: Inhibitors, Biocides and Scavengers
    • Process Control as a Corrosion Barrier
  6. 6

    Corrosion Monitoring and Inspection Techniques

    • Intrusive Monitoring: Coupons, ER and LPR Probes
    • Water Chemistry, Iron Counts and Bacteria Monitoring
    • Intelligent Pigging of Pipelines
    • Visual and Ultrasonic Inspection
    • Radiography and Surface Crack Methods
    • Guided Wave and CUI Screening Techniques
  7. 7

    Inspection Planning, Evaluation and Anomaly Management

    • Risk-Based Inspection: API RP 580 and API RP 581
    • Inspection Codes: API 510, API 570 and API 653
    • Fitness-for-Service: API 579-1/ASME FFS-1
    • Repair Options for Corroded Equipment
    • Data, Records and Anomaly Management
    • Putting It Together: From Finding to Close-Out

Bu sayfa, eğitimin genellikle neleri kapsadığını anlatır. Her eğitim sağlayıcı içeriği, süreyi ve sırayı gruba göre değiştirebilir. Rezervasyon yapmadan önce son içeriği eğitim sağlayıcıyla teyit edin.

Kod
Tür
Sınıf içi
Modüller
7
Beceri seviyesi
Orta
Dil
EN
En fazla katılımcı
20
Sertifika
Evet
Değerlendirme
Hayır

Kendi hızınızda öğrenmeyi mi tercih edersiniz?

Aynı konu, bugün başlayabileceğiniz bir çevrimiçi kurs olarak.

Diğer kurslar: Makine Mühendisliği

Aynı konu alanında eğitmenli diğer kurslar.

Yorumlar

Öğrenenlerin Corrosion Management and Inspection hakkında söyledikleri.

Henüz yorum yok

Corrosion Management and Inspection hakkında ilk yorumu yapan siz olun.

Yorum yazmak için giriş yapın. Her yorumu gösterilmeden önce kontrol ederiz.

Hemen rezervasyon yapın

Aradığınız bu mu?

Tercih ettiğiniz konumda kursu ve yer durumunu öğrenmek için ekibimizle iletişime geçin

Hemen rezervasyon yapın
Image for the book now section

Teklif al