iCompetent logosu
Sınıf içi · EğitmenliOil & GasOrtaSertifika

Drilling Operations Fundamentals

How a well is drilled, from rig systems to well control. Covers rig equipment and the drilling process, drilling fluids and hydraulics, casing and cementing, directional and horizontal drilling, well control and the kick, and the planning, cost and safety management of drilling operations.

Modüller
7
En fazla katılımcı
20
Dil
EN
Sektörler

Genellikle neleri kapsar

  1. 1

    The Well Life Cycle and the Drilling Team

    • From Prospect to Producing Well: Where Drilling Fits
    • Who Does What on a Drilling Rig
    • Reading a Daily Drilling Report
    • Pressure Basics for Drillers: Hydrostatic Pressure and Gradients
  2. 2

    Rig Systems and the Drilling Process

    • Rig Systems
    • Drilling Fluids and Hydraulics
    • Tripping Practice: Hook Load, Trip Sheets and Hole Fill
    • Drill Bits and the Bottom Hole Assembly
    • Solids Control and Mud Monitoring
  3. 3

    Drilling Parameters and Hole Problems

    • Optimising Rate of Penetration: Weight, Speed and Flow
    • Hole Cleaning in Vertical and Deviated Wells
    • Stuck Pipe: Recognise the Mechanism and Respond
    • Lost Circulation: Diagnosis and Treatment
  4. 4

    Well Construction

    • Casing and Cementing
    • Directional and Horizontal Drilling
    • Running Casing and Planning the Cement Job
    • Pressure Tests, Leak-Off Tests and Cement Evaluation
    • Directional Surveys, Doglegs and Trajectory Control
  5. 5

    Well Control and Operations Management

    • Well Control
    • Planning, Cost and Safety Management
    • Shut-In Procedures and Kill Sheet Basics
    • Barrier Management During Tripping, Cementing and Testing
  6. 6

    Special Hazards and Operations

    • Hydrogen Sulphide and Shallow Gas
    • Floating Rig Operations: Riser, Heave and the Subsea BOP
    • Formation Evaluation While Drilling
    • Fishing, Sidetracks and Contingency Decisions
  7. 7

    Putting It Together: Cases and the Complete Picture

    • Case Study: A Kick While Tripping Out
    • Case Study: Stuck Pipe in a Deviated Section
    • Case Study: Planning a Hole Section From Pressure to Casing Point
    • The Complete Picture: Drilling a Section Safely

Bu sayfa, eğitimin genellikle neleri kapsadığını anlatır. Her eğitim sağlayıcı içeriği, süreyi ve sırayı gruba göre değiştirebilir. Rezervasyon yapmadan önce son içeriği eğitim sağlayıcıyla teyit edin.

Kod
Tür
Sınıf içi
Modüller
7
Beceri seviyesi
Orta
Dil
EN
En fazla katılımcı
20
Sertifika
Evet
Değerlendirme
Hayır

Kendi hızınızda öğrenmeyi mi tercih edersiniz?

Aynı konu, bugün başlayabileceğiniz bir çevrimiçi kurs olarak.

Diğer kurslar: Petrol ve Gaz

Aynı konu alanında eğitmenli diğer kurslar.

Yorumlar

Öğrenenlerin Drilling Operations Fundamentals hakkında söyledikleri.

Henüz yorum yok

Drilling Operations Fundamentals hakkında ilk yorumu yapan siz olun.

Yorum yazmak için giriş yapın. Her yorumu gösterilmeden önce kontrol ederiz.

Hemen rezervasyon yapın

Aradığınız bu mu?

Tercih ettiğiniz konumda kursu ve yer durumunu öğrenmek için ekibimizle iletişime geçin

Hemen rezervasyon yapın
Image for the book now section

Teklif al