iCompetent logosu
Sınıf içi · EğitmenliMechanical EngineeringBaşlangıçSertifika

Industrial Valves: Selection and Maintenance

The valves that make up a process plant: gate, globe, ball, butterfly, plug, check and relief. Covers how each type works and where it belongs, pressure and temperature ratings, actuation, and the inspection, testing and maintenance that keep valves tight and operable.

Modüller
6
En fazla katılımcı
20
Dil
EN

Genellikle neleri kapsar

  1. 1

    Orientation: Valves in a Process Plant

    • Why Valves Matter
    • Parts of a Valve: Body, Bonnet, Trim and Stem
    • Valves on Drawings and in the Field
    • Operating Manual Valves Safely
  2. 2

    Valve Types and Duties

    • Isolation and Regulating Valves
    • Check Valves and Relief Devices
    • Diaphragm, Pinch, Knife Gate and Multi-Port Valves
    • Choosing a Valve Type for the Duty
    • Installing Check Valves and Relief Valves Correctly
  3. 3

    Ratings, Materials and Actuation

    • Pressure Ratings, Ends and Materials
    • Actuation and Control Valves
    • Reading a Valve Nameplate and Data Sheet
    • Gear Operators, Position Indicators and Limit Switches
  4. 4

    Valves and Safe Isolation

    • Valves as Isolation Points
    • Proving an Isolation and Releasing Trapped Pressure
    • Valve Status Control: Locks and Car Seals
    • Stored Energy in Actuated Valves
  5. 5

    Inspection, Testing and Maintenance

    • Testing and Leak Tightness
    • Maintenance and Common Failures
    • Routine Valve Inspection Rounds
    • Repacking a Valve Stem
    • Removing and Reinstalling a Flanged Valve
  6. 6

    Putting It Together: Valve Cases and Next Steps

    • Case Study: The Passing Isolation Valve
    • Case Study: The Shutdown Valve That Closed Too Slowly
    • Common Valve Mistakes and How to Avoid Them
    • Your Valve Competence Checklist and Next Steps

Bu sayfa, eğitimin genellikle neleri kapsadığını anlatır. Her eğitim sağlayıcı içeriği, süreyi ve sırayı gruba göre değiştirebilir. Rezervasyon yapmadan önce son içeriği eğitim sağlayıcıyla teyit edin.

Kod
Tür
Sınıf içi
Modüller
6
Beceri seviyesi
Başlangıç
Dil
EN
En fazla katılımcı
20
Sertifika
Evet
Değerlendirme
Hayır

Kendi hızınızda öğrenmeyi mi tercih edersiniz?

Aynı konu, bugün başlayabileceğiniz bir çevrimiçi kurs olarak.

Diğer kurslar: Makine Mühendisliği

Aynı konu alanında eğitmenli diğer kurslar.

Yorumlar

Öğrenenlerin Industrial Valves: Selection and Maintenance hakkında söyledikleri.

Henüz yorum yok

Industrial Valves: Selection and Maintenance hakkında ilk yorumu yapan siz olun.

Yorum yazmak için giriş yapın. Her yorumu gösterilmeden önce kontrol ederiz.

Hemen rezervasyon yapın

Aradığınız bu mu?

Tercih ettiğiniz konumda kursu ve yer durumunu öğrenmek için ekibimizle iletişime geçin

Hemen rezervasyon yapın
Image for the book now section

Teklif al