Shutdown and Turnaround Essentials
A working-knowledge course for operators, maintenance and contractor supervisors, planners, inspectors and HSE advisers who are preparing for or working in a planned plant shutdown (turnaround) at a refinery, petrochemical plant or gas plant. It follows the event from scope and planning through safe shutdown, isolation, control of work, quality and handback to start-up and close-out. It is awareness training and awards no accredited certificate; site procedures and the permit system always come first.
- Modüller
- 7
- En fazla katılımcı
- 20
- Dil
- EN
Genellikle neleri kapsar
- 1
Turnaround Fundamentals
- What a Turnaround Is and the Kinds of Planned Outage
- Why Plants Shut Down and What Is at Stake
- The Turnaround Phases and Milestones
- The Turnaround Organisation and Roles
- Why Turnarounds Concentrate Risk
- 2
Scope, Planning and Scheduling
- Building the Work List and Challenging Scope
- Inspection-Driven Scope and the Scope Freeze
- Work Packs, Job Plans and Estimates
- Scheduling the Turnaround
- Materials, Long-Lead Items, Tools and Laydown
- 3
People, Contractors and the HSE Plan
- Contractor Selection and Mobilisation for a Peak Workforce
- Onboarding and Site Induction at Scale
- The Turnaround HSE Plan
- Temporary Facilities, Traffic and Emergency Arrangements
- 4
Safe Shutdown, Isolation and Handover to Maintenance
- The Unit Shutdown and Decommissioning Sequence
- Depressurising, Draining, Purging, Steaming and Cooling
- Pyrophoric Iron Sulfide and Nitrogen Asphyxiation
- Isolation and Blinding in Bulk
- The Operations-to-Maintenance Handover
- 5
Controlling Work During Execution
- Permits at Turnaround Volume
- Simultaneous Work in Congested Units
- Line Breaking, Vessel Entry and Inert Entry
- Catalyst Handling, Hydro-Jetting and Hot Work
- Heavy Lifts and Scaffolding in a Turnaround
- 6
Change, Progress and Quality
- Emergent Work and Scope Change Control
- Progress Tracking, Daily Meetings and Shift Handover
- Fatigue and Pressure in the Final Days
- Flange and Joint Management
- Inspection Hold Points and Leak Testing
- 7
Handback, Start-up and Close-out
- Mechanical Completion, Punch Lists and De-isolation
- Pre-Startup Safety Review and Walk-Downs
- Start-up Hazards and the Texas City Explosion
- Close-out, Lessons Learned and Turnaround KPIs
Bu sayfa, eğitimin genellikle neleri kapsadığını anlatır. Her eğitim sağlayıcı içeriği, süreyi ve sırayı gruba göre değiştirebilir. Rezervasyon yapmadan önce son içeriği eğitim sağlayıcıyla teyit edin.
Kendi hızınızda öğrenmeyi mi tercih edersiniz?
Aynı konu, bugün başlayabileceğiniz bir çevrimiçi kurs olarak.
Shutdown and Turnaround Essentials
5 sa 57 dk
Diğer kurslar: Petrol ve Gaz
Aynı konu alanında eğitmenli diğer kurslar.
Yorumlar
Öğrenenlerin Shutdown and Turnaround Essentials hakkında söyledikleri.
Henüz yorum yok
Shutdown and Turnaround Essentials hakkında ilk yorumu yapan siz olun.
Yorum yazmak için giriş yapın. Her yorumu gösterilmeden önce kontrol ederiz.
Hemen rezervasyon yapın
Aradığınız bu mu?
Tercih ettiğiniz konumda kursu ve yer durumunu öğrenmek için ekibimizle iletişime geçin
Hemen rezervasyon yapın