iCompetent logosu
Sınıf içi · EğitmenliMechanical EngineeringOrtaSertifika

Total Productive Maintenance (TPM) and OEE

A practical course for maintenance and production supervisors, engineers and reliability staff on total productive maintenance (TPM) and overall equipment effectiveness (OEE). Learn to measure the six big losses, calculate OEE and TEEP correctly and avoid the ways the figure misleads, run autonomous maintenance with operators safely, and plan a TPM pilot with the other pillars. It is awareness and practitioner training and does not award any TPM certificate or award.

Modüller
7
En fazla katılımcı
20
Dil
EN

Genellikle neleri kapsar

  1. 1

    Orientation: What TPM Is and Why It Matters

    • What Total Productive Maintenance Is
    • Where TPM Came From
    • Losses, Deterioration and Ownership: The TPM Way of Thinking
    • How TPM Fits with Maintenance Strategy, Reliability and Lean
  2. 2

    The Six Big Losses

    • From Calendar Time to Fully Productive Time
    • Availability Losses: Breakdowns and Setups
    • Performance Losses: Minor Stops and Reduced Speed
    • Quality Losses: Process Defects and Start-up Rejects
    • Recording Losses on the Shop Floor
  3. 3

    Calculating OEE

    • OEE Definitions: Planned Production Time, Run Time, Ideal Cycle Time and Good Count
    • Availability, Performance and Quality, Step by Step
    • The Simple Formula and the Cross-Check
    • Mixed Products and Different Cycle Times
    • TEEP and Loading
  4. 4

    Using OEE Well

    • Benchmarks and the "World-Class" Figure
    • How OEE Gets Gamed
    • Comparing Lines and Sites
    • From OEE to Action: Loss Trees and Pareto Charts
    • MTBF and MTTR on the Shop Floor
  5. 5

    The TPM Pillars

    • The Pillar Model as It Is Commonly Taught
    • Focused Improvement
    • Planned Maintenance within TPM
    • Quality Maintenance
    • Early Equipment Management
    • Training, Safety and Office TPM
  6. 6

    Autonomous Maintenance

    • The Seven Steps of Autonomous Maintenance
    • Initial Cleaning Is Inspection
    • Tagging Abnormalities
    • Contamination Sources and Cleaning, Inspection and Lubrication Standards
    • Safety When Operators Touch Equipment
    • The Operator–Maintenance Partnership
  7. 7

    Implementing TPM

    • The Steering Group and the Master Plan
    • Choosing Pilot Equipment
    • Measuring Progress: Beyond the OEE Figure
    • Case: A TPM Pilot on a Packing Line
    • Sustaining TPM and Next Steps

Bu sayfa, eğitimin genellikle neleri kapsadığını anlatır. Her eğitim sağlayıcı içeriği, süreyi ve sırayı gruba göre değiştirebilir. Rezervasyon yapmadan önce son içeriği eğitim sağlayıcıyla teyit edin.

Kod
Tür
Sınıf içi
Modüller
7
Beceri seviyesi
Orta
Dil
EN
En fazla katılımcı
20
Sertifika
Evet
Değerlendirme
Hayır

Kendi hızınızda öğrenmeyi mi tercih edersiniz?

Aynı konu, bugün başlayabileceğiniz bir çevrimiçi kurs olarak.

Diğer kurslar: Makine Mühendisliği

Aynı konu alanında eğitmenli diğer kurslar.

Yorumlar

Öğrenenlerin Total Productive Maintenance (TPM) and OEE hakkında söyledikleri.

Henüz yorum yok

Total Productive Maintenance (TPM) and OEE hakkında ilk yorumu yapan siz olun.

Yorum yazmak için giriş yapın. Her yorumu gösterilmeden önce kontrol ederiz.

Hemen rezervasyon yapın

Aradığınız bu mu?

Tercih ettiğiniz konumda kursu ve yer durumunu öğrenmek için ekibimizle iletişime geçin

Hemen rezervasyon yapın
Image for the book now section

Teklif al