Well Completion and Workover
Turning a drilled hole into a producing well, and keeping it producing. Covers completion types and design, tubing, packers and downhole equipment, perforating and stimulation, sand control, well intervention and workover operations, and well integrity over the full life cycle.
- Modüller
- 8
- En fazla katılımcı
- 20
- Dil
- EN
Genellikle neleri kapsar
- 1
Completion Engineering Foundations
- The Completion Life Cycle and Basis of Design
- Nodal Analysis for Completion Design
- Tubing Stress Analysis and Movement
- Materials Selection for Corrosive Wells
- Completion and Workover Fluids
- 2
Completion Design
- Completion Types
- Completion Equipment
- Designing Completions for Artificial Lift
- Horizontal and Multilateral Completion Architecture
- Intelligent Completions: Design and Failure Modes
- 3
Connecting to the Reservoir
- Perforating and Stimulation
- Sand Control
- Perforating Design: Charges, Conveyance and Shock Loads
- Hydraulic Fracture Design and Execution Judgement
- Selecting Sand Control: Comparing the Options
- 4
Installing the Completion
- Writing the Completion Programme
- Wellbore Cleanout and Displacement
- Running, Setting and Testing the Completion
- Barrier Verification During Completion Operations
- Well Start-Up, Clean-Up and Initial Testing
- 5
Intervention and Integrity
- Well Intervention and Workover
- Well Integrity
- Coiled Tubing Job Design: Forces, Lock-Up and Fatigue
- Pressure Control Equipment for Live-Well Intervention
- Diagnosing Sustained Casing Pressure
- 6
Diagnosing and Restoring Production
- Diagnosing Underperforming Wells
- Downhole Scale, Wax and Asphaltene Remediation
- Water and Gas Shut-Off Techniques
- Fishing and Milling Operations
- Recompletion, Sidetrack or Abandon
- Intervention Candidate Selection and Economics
- 7
Well Integrity Management and Abandonment
- Integrity Categories and Operating With Impaired Barriers
- Safety Valve and Tree Valve Testing
- Assessing Corrosion and Casing Wear With Logs
- Designing Permanent Plug and Abandonment
- Abandonment Execution and Verification
- 8
Applying Judgement: Completion and Workover Cases
- Case Study: Workover of a Well With a Tubing Leak
- Case Study: Selecting a Completion for a Subsea Development
- Case Study: A Stimulation That Damaged the Well
- Case Study: Converting a Producer to Water Injection
- Case Study: High-Pressure, High-Temperature Completion
- Defending Completion and Intervention Decisions
Bu sayfa, eğitimin genellikle neleri kapsadığını anlatır. Her eğitim sağlayıcı içeriği, süreyi ve sırayı gruba göre değiştirebilir. Rezervasyon yapmadan önce son içeriği eğitim sağlayıcıyla teyit edin.
Kendi hızınızda öğrenmeyi mi tercih edersiniz?
Aynı konu, bugün başlayabileceğiniz bir çevrimiçi kurs olarak.

Well Completion and Workover
9 sa 22 dk
Diğer kurslar: Petrol ve Gaz
Aynı konu alanında eğitmenli diğer kurslar.
Yorumlar
Öğrenenlerin Well Completion and Workover hakkında söyledikleri.
Henüz yorum yok
Well Completion and Workover hakkında ilk yorumu yapan siz olun.
Yorum yazmak için giriş yapın. Her yorumu gösterilmeden önce kontrol ederiz.
Hemen rezervasyon yapın
Aradığınız bu mu?
Tercih ettiğiniz konumda kursu ve yer durumunu öğrenmek için ekibimizle iletişime geçin
Hemen rezervasyon yapın
