Lifting Operations & Rigging
Planning and executing safe mechanical lifting: lift categorisation and lift plans, rigging gear selection and inspection, lifting-team roles, and the exclusion-zone and line-of-fire controls that keep people away from suspended loads. For anyone who rigs, signals, supervises or works near crane and hoist operations.
Dört seviye
Her seviye bir öncekinin üzerine kurulur.
- 1Farkındalık
- 2Bilgi
- 3Uygulama
- 4Ustalık
Uygulama ve Ustalık bir kursla değil, işte kanıtlanır: kuruluşunuzdaki bir değerlendirici sizi corp.icompetent.com üzerinde onaylar.
Bu beceri için kurslar yolda. Bu arada kurs kataloğuna göz atabilirsiniz.
Neler öğreneceksiniz
- Explain why a suspended load is stored energy and apply the never-under-a-suspended-load rule and exclusion zones
- Describe the roles in a lifting team — appointed person, lifting supervisor, crane operator, rigger/slinger and signaller — and the one-signaller rule
- Categorise lifts as routine or non-routine/critical and state what a documented lift plan must cover
- Select and inspect rigging gear using SWL/WLL, colour-coding and sling-angle derating, and reject damaged gear
- Carry out pre-lift checks in the correct sequence, including ground conditions, outrigger set-up, wind limits and dropped-object checks on the load
- Plan, brief and supervise a non-routine lift, and stop and re-plan when conditions deviate from the plan
Lifting Operations & Rigging becerisini kazanmaya hazır mısınız?
Bu beceriyi kazandıran bir kurs alın. Bitirdiğinizde seviye profilinizde görünür.