Mechanical Seals and Sealing Systems
How mechanical seals work, why they fail, and how to select and support them. Covers seal construction and the fluid film, single and dual arrangements, API seal flush plans, gaskets and static sealing, and diagnosing seal failure from the evidence on the faces.
- Módulos
- 7
- Máximo de participantes
- 20
- Idioma
- EN
Qué suele abarcar
- 1
Orientation: Sealing in Rotating Equipment
- Why Shaft Sealing Matters
- Packing or Mechanical Seal: Choosing the Shaft Seal
- Seal Components and Design Words
- Seal Classification and the Seal Data Sheet
- 2
How a Mechanical Seal Works
- Construction and the Fluid Film
- Seal Arrangements
- Balance, Closing Force and Face Loading
- Pusher and Bellows Seals in Service
- Gas-Lubricated and Dry Gas Seals
- 3
Supporting the Seal
- Seal Flush Plans
- Static Sealing: Gaskets and Joints
- Choosing a Flush Plan for the Service
- Buffer and Barrier Systems in Practice
- Quench, Leakage Detection and Containment Plans
- 4
Elastomers and Static Seals in Depth
- Choosing Elastomers for Seals
- O-Ring Fit: Squeeze, Extrusion and Gas Decompression
- Selecting a Gasket for the Joint
- Diagnosing a Leaking Static Seal
- 5
Installing and Commissioning Seals
- Preparing the Pump: Shaft, Housing and Alignment Checks
- Fitting a Cartridge Seal Step by Step
- Commissioning: Venting, Filling and First Start
- Operating Practices That Protect Seals
- 6
Failure Diagnosis
- Diagnosing from the Faces
- Improving Seal Life
- Monitoring Seals in Service
- Root Cause Analysis for Repeat Seal Failures
- 7
Applying Seal Knowledge: Cases and Next Steps
- Case Study: The Hot Oil Pump That Ate Seals
- Case Study: Upgrading the Seal on a Toxic Service
- Common Seal Mistakes and Their Fixes
- Building a Seal Reliability Plan
Esta página describe lo que suele abarcar la formación. Cada proveedor de formación puede cambiar el contenido, la duración y el orden para adaptarlos al grupo. Confirme el contenido final con el proveedor de formación antes de reservar.
¿Prefiere aprender a su ritmo?
El mismo tema en un curso en línea que puede empezar hoy.

Mechanical Seals and Sealing Systems
5 h 56 min
Más cursos: Ingeniería mecánica
Otros cursos con formador de la misma área temática.
Reseñas
Lo que dicen los participantes sobre Mechanical Seals and Sealing Systems.
Todavía no hay reseñas
Sea la primera persona en contar cómo fue Mechanical Seals and Sealing Systems.
Inicie sesión para escribir una. Revisamos todas las reseñas antes de mostrarlas.
Reservar ahora
¿Es lo que buscaba?
Póngase en contacto con nuestro equipo para consultar el curso y la disponibilidad de plazas en la ubicación que prefiera
Reservar ahora


