Logotipo de iCompetent
Presencial · Con formadorMechanical EngineeringIntermedioCertificado

Pressure Vessels and Heat Exchangers

Separators, drums, columns and exchangers in oil and gas service. Covers vessel design and construction, internals and separation, exchanger types and thermal performance, fouling, and the inspection and integrity management that keeps static equipment safe.

Módulos
7
Máximo de participantes
20
Idioma
EN

Qué suele abarcar

  1. 1

    Orientation and Foundations

    • Static Equipment on a Process Site
    • Pressure, Stress and Wall Thickness
    • Reading the Nameplate and Data Book
    • Codes, Standards and Duties
  2. 2

    Pressure Vessels

    • Vessel Design and Construction
    • Separators and Internals
    • Separator Capacity and Operating Limits
    • Level Control, Interface and Upsets
    • Overpressure and Vacuum Protection in Practice
  3. 3

    Heat Exchangers

    • Exchanger Types
    • Performance, Fouling and Cleaning
    • Duty, LMTD and the Heat Transfer Coefficient
    • Tube Leaks: Detection, Testing and Plugging
    • Air Coolers and Plate Exchangers in Service
  4. 4

    Operating Vessels and Exchangers Safely

    • Start-Up, Shutdown and Thermal Stress
    • Brittle Fracture and Rapid Depressurisation
    • Preparing Vessels for Entry and Opening
    • Pressure Testing Safely
  5. 5

    Integrity and Inspection

    • Damage Mechanisms
    • Inspection, Assessment and Repair
    • Corrosion Rate, Remaining Life and Inspection Intervals
    • Corrosion Under Insulation and External Integrity
  6. 6

    Applying It: Cases and Decisions

    • Case Study: Carryover from a Production Separator
    • Case Study: An Exchanger Losing Duty
    • Case Study: Local Thinning Found at Inspection
    • Managing Change: Re-Rating and Change of Service
  7. 7

    Consolidation and Next Steps

    • Integrity Operating Windows
    • The Complete Picture: Design, Operation and Inspection
    • Common Mistakes and Their Fixes
    • Your Competence Checklist and Next Steps

Esta página describe lo que suele abarcar la formación. Cada proveedor de formación puede cambiar el contenido, la duración y el orden para adaptarlos al grupo. Confirme el contenido final con el proveedor de formación antes de reservar.

Código
Tipo
Presencial
Módulos
7
Nivel
Intermedio
Idioma
EN
Máximo de participantes
20
Certificado
Sí
Evaluación
No

¿Prefiere aprender a su ritmo?

El mismo tema en un curso en línea que puede empezar hoy.

Más cursos: Ingeniería mecánica

Otros cursos con formador de la misma área temática.

Reseñas

Lo que dicen los participantes sobre Pressure Vessels and Heat Exchangers.

Todavía no hay reseñas

Sea la primera persona en contar cómo fue Pressure Vessels and Heat Exchangers.

Inicie sesión para escribir una. Revisamos todas las reseñas antes de mostrarlas.

Reservar ahora

¿Es lo que buscaba?

Póngase en contacto con nuestro equipo para consultar el curso y la disponibilidad de plazas en la ubicación que prefiera

Reservar ahora
Image for the book now section

Obtener presupuesto