Logotipo de iCompetent
Presencial · Con formadorMechanical EngineeringIntermedioCertificado

Total Productive Maintenance (TPM) and OEE

A practical course for maintenance and production supervisors, engineers and reliability staff on total productive maintenance (TPM) and overall equipment effectiveness (OEE). Learn to measure the six big losses, calculate OEE and TEEP correctly and avoid the ways the figure misleads, run autonomous maintenance with operators safely, and plan a TPM pilot with the other pillars. It is awareness and practitioner training and does not award any TPM certificate or award.

Módulos
7
Máximo de participantes
20
Idioma
EN

Qué suele abarcar

  1. 1

    Orientation: What TPM Is and Why It Matters

    • What Total Productive Maintenance Is
    • Where TPM Came From
    • Losses, Deterioration and Ownership: The TPM Way of Thinking
    • How TPM Fits with Maintenance Strategy, Reliability and Lean
  2. 2

    The Six Big Losses

    • From Calendar Time to Fully Productive Time
    • Availability Losses: Breakdowns and Setups
    • Performance Losses: Minor Stops and Reduced Speed
    • Quality Losses: Process Defects and Start-up Rejects
    • Recording Losses on the Shop Floor
  3. 3

    Calculating OEE

    • OEE Definitions: Planned Production Time, Run Time, Ideal Cycle Time and Good Count
    • Availability, Performance and Quality, Step by Step
    • The Simple Formula and the Cross-Check
    • Mixed Products and Different Cycle Times
    • TEEP and Loading
  4. 4

    Using OEE Well

    • Benchmarks and the "World-Class" Figure
    • How OEE Gets Gamed
    • Comparing Lines and Sites
    • From OEE to Action: Loss Trees and Pareto Charts
    • MTBF and MTTR on the Shop Floor
  5. 5

    The TPM Pillars

    • The Pillar Model as It Is Commonly Taught
    • Focused Improvement
    • Planned Maintenance within TPM
    • Quality Maintenance
    • Early Equipment Management
    • Training, Safety and Office TPM
  6. 6

    Autonomous Maintenance

    • The Seven Steps of Autonomous Maintenance
    • Initial Cleaning Is Inspection
    • Tagging Abnormalities
    • Contamination Sources and Cleaning, Inspection and Lubrication Standards
    • Safety When Operators Touch Equipment
    • The Operator–Maintenance Partnership
  7. 7

    Implementing TPM

    • The Steering Group and the Master Plan
    • Choosing Pilot Equipment
    • Measuring Progress: Beyond the OEE Figure
    • Case: A TPM Pilot on a Packing Line
    • Sustaining TPM and Next Steps

Esta página describe lo que suele abarcar la formación. Cada proveedor de formación puede cambiar el contenido, la duración y el orden para adaptarlos al grupo. Confirme el contenido final con el proveedor de formación antes de reservar.

Código
Tipo
Presencial
Módulos
7
Nivel
Intermedio
Idioma
EN
Máximo de participantes
20
Certificado
Sí
Evaluación
No

Reseñas

Lo que dicen los participantes sobre Total Productive Maintenance (TPM) and OEE.

Todavía no hay reseñas

Sea la primera persona en contar cómo fue Total Productive Maintenance (TPM) and OEE.

Inicie sesión para escribir una. Revisamos todas las reseñas antes de mostrarlas.

Reservar ahora

¿Es lo que buscaba?

Póngase en contacto con nuestro equipo para consultar el curso y la disponibilidad de plazas en la ubicación que prefiera

Reservar ahora
Image for the book now section

Obtener presupuesto