3D Exploration Simulation | 6×4 Prime Mover (Tractor Unit)
Explore a 6x4 prime mover (tractor unit) in 3D in the yard. It is built to ISO 7638-1 (ABS/EBS electrical connector, 24 V), ISO 12098 (15-pole lighting connector, 24 V), and ISO 1185 (7-pole 24N connector). Open every part and find the fifth wheel's locking jaws, the release handle and safety lock, red and yellow air lines, the ABS or EBS cable and socket, a spring brake chamber and the air tanks that feed it, blind-spot mirrors, cab steps, grab handles, and wheel chocks. Press Finish exploring when you are done.
- काम
- 10 काम
- भाषाएँ
- English
- सहेजा जाता है
- कोर्स के अंदर
यहीं चलाएँ
ये सिमुलेशन परिचय और अभ्यास के लिए हैं। ये व्यावहारिक प्रशिक्षण और किसी सक्षम व्यक्ति द्वारा व्यावहारिक मूल्यांकन का स्थान नहीं लेते।
आप क्या करेंगे
- 1Open every part of the prime mover
- 2Find the fifth wheel's locking jaws
- 3Find the release handle and the safety lock that holds it in
- 4Find the red and the yellow air lines
- 5Find the ABS or EBS cable and the socket it plugs into
- 6Find a spring brake chamber and the air tanks that feed it
- 7Find the blind-spot mirrors
- 8Find the cab steps and the grab handles
- 9Find the wheel chocks
- 10काम पूरा होने पर "खोजना पूरा करें" दबाएँ
10 काम · अंग्रेज़ी में
इनके अनुसार बनाया गया
- ISO 7638-1 (ABS/EBS electrical connector, 24 V)
इन दस्तावेज़ों के अनुरूप; इन्हें लिखने वाली संस्थाओं द्वारा स्वीकृत नहीं।
समीक्षाएँ
3D Exploration Simulation | 6×4 Prime Mover (Tractor Unit) के बारे में शिक्षार्थी क्या कहते हैं।
अभी कोई समीक्षा नहीं
सबसे पहले बताएँ कि 3D Exploration Simulation | 6×4 Prime Mover (Tractor Unit) कैसा था।
पहले साइन इन करें और एक अभ्यास पूरा करें। दिखाने से पहले हम हर समीक्षा जाँचते हैं।
और सिमुलेशन
सभी सिमुलेशन
Well kill assessmentDrillingShut in the well5 काम · पास अंक 80%
Rear-wheel steering simulation | ForkliftMaterials handlingDrive the LX-25 electric counterbalance forklift (2.5 t) through the cone lane and into the green finish circle.1 काम · पास अंक 70%
फोर्क की ऊँचाई, झुकाव और चलानाMaterials handlingपैलेट उठाएँ और उसे बे B में रखें, फिर फोर्क बाहर निकालें1 काम · पास अंक 70%
टीमों के लिए
आपकी साइट, आपके उपकरण, आपकी प्रक्रियाएँ
डेमो उन्हीं इंजनों पर चलते हैं जो हम ग्राहकों के लिए बनाते हैं। हमें काम बताएँ और हम उसे बनाते हैं; हर चरण की समीक्षा आप करते हैं।