Centrifugal Pumps: Operation and Maintenance
How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and cavitation, operating away from best efficiency point, alignment and installation, and the failure modes that dominate maintenance workload.
- Modules
- 7
- Participants max.
- 20
- Langue
- EN
Ce qu'elle couvre habituellement
- 1
Orientation: Centrifugal Pumps in the Plant
- Pump Families and Configurations
- Reading a Pump Data Sheet and Nameplate
- Head, Pressure and Power Calculations
- Working Safely on Pumps
- 2
How a Centrifugal Pump Works
- Principles and Components
- The Pump Curve and the System Curve
- Impeller Trimming and Speed Change
- Pumps in Parallel and in Series
- Radial and Axial Thrust
- 3
Suction Conditions and Cavitation
- NPSH and Cavitation
- Suction System Design and Priming
- Calculating NPSH Available
- Suction Vessels, Sumps and Submergence
- Diagnosing Cavitation, Recirculation and Gas in the Field
- 4
Maintenance and Failure
- Installation and Alignment
- Failure Modes and Monitoring
- Mechanical Seals and Seal Support Plans
- Overhaul: Wear Rings, Clearances and Reassembly
- 5
Operating Centrifugal Pumps Well
- Starting and Stopping a Centrifugal Pump
- Standby Pumps and Changeovers
- Flow Control and Energy Use
- Operator Rounds: Seeing Problems Early
- 6
Troubleshooting and Reliability Improvement
- A Troubleshooting Method: Pump, System or Measurement?
- Field Performance Testing and Vibration Signatures
- Investigating Repeat Seal Failures
- Bad Actors and Reliability Improvement
- 7
Application and Consolidation
- Special Duties: Hot, Viscous, Slurry and Volatile Liquids
- Case Study: The Oversized Pump
- Common Pump Mistakes and Their Fixes
- Your Pump Toolkit and Next Steps
Cette page décrit ce que la formation couvre habituellement. Chaque prestataire de formation peut modifier le contenu, la durée et l'ordre pour s'adapter au groupe. Confirmez le contenu final avec le prestataire de formation avant de réserver.
Vous préférez apprendre à votre rythme ?
Le même sujet en cours en ligne, à commencer dès aujourd'hui.

Centrifugal Pumps: Operation and Maintenance
5 h 55 min
Autres cours : Génie mécanique
Autres cours avec un formateur dans le même domaine.
Avis
Ce que les apprenants disent de Centrifugal Pumps: Operation and Maintenance.
Pas encore d'avis
Soyez la première personne à dire ce que vous avez pensé de Centrifugal Pumps: Operation and Maintenance.
Connectez-vous pour en rédiger un. Nous vérifions chaque avis avant de l'afficher.
Réserver
Est-ce ce que vous cherchiez ?
Contactez notre équipe pour vérifier la disponibilité du cours et des places dans le lieu de votre choix
Réserver


