Production, transport et distribution d'électricité, services d'eau et de gaz.
Cours
60
Compétences
0
Pétrole et gaz
Follows on from Supply Chain Management, for people who run or depend on the store at an oil and gas site. Learn how to catalogue MRO material,…
Santé, sécurité et environnement (HSE)
Electrical safe work practices for electricians, maintenance technicians, engineers and supervisors in US facilities: the electrical safety program,…
Génie mécanique
Independent preparation for the API 510 Authorized Pressure Vessel Inspector exam, for inspectors and integrity engineers in refineries, gas plants…
Génie mécanique
The core methods of reliability engineering for maintenance, reliability and asset engineers in oil and gas, petrochemical and heavy industry. Learn…
Gestion de projet
How oil, gas and industrial capital projects are delivered through engineering, procurement and construction, for engineers, project, contract,…
Instrumentation et contrôle
A practical course on protecting industrial control systems for instrument and control engineers, automation engineers, OT and IT staff, and…
Ressources humaines
A practical course for HR and learning and development staff, competence assurance coordinators, assessors, supervisors and managers in oil and gas,…
Pétrole et gaz
A practical course for commissioning, completions, construction, operations and project staff on oil, gas and process projects, covering the path…
Santé, sécurité et environnement (HSE)
A beginner course on carbon capture, utilisation and storage for oil and gas engineers, geoscientists, project, HSE and commercial staff, and…
Santé, sécurité et environnement (HSE)
Preventing falls from height and protecting people below. Covers the avoid-prevent-minimise hierarchy, access equipment selection, fall arrest…
Santé, sécurité et environnement (HSE)
Managing water as a resource and effluent as a controlled discharge. Covers water balance and reduction, drainage systems, trade effluent consents…
Génie mécanique
Detecting machine faults before they become failures. Covers vibration measurement and units, the frequency spectrum and what each peak means, fault…
Génie électrique
Variable frequency drives from first principles to field troubleshooting. Covers the rectifier-DC link-inverter architecture, volts per hertz and…
Génie électrique
Power and distribution transformers in industrial service. Covers construction and principles, vector groups and tap changers, cooling and loading,…
Instrumentation et contrôle
Thermocouples, resistance thermometers and non-contact measurement in process service. Covers the physics of each sensor type, thermowells and…
Génie mécanique
Two of the highest-return skills in rotating equipment maintenance. Covers misalignment types and their cost, pre-alignment checks including soft…
Instrumentation et contrôle
Functional safety for process plant. Covers layers of protection, safety instrumented functions and SIL, the safety lifecycle, hardware architecture…
Santé, sécurité et environnement (HSE)
Preventing major accidents rather than personal injuries. Covers the difference between process and personal safety, the elements of a process safety…
Instrumentation et contrôle
Feedback control from first principles to a tuned, stable loop. Covers process dynamics and gain, the PID algorithm and what each term actually does,…
Génie mécanique
Separators, drums, columns and exchangers in oil and gas service. Covers vessel design and construction, internals and separation, exchanger types…
Instrumentation et contrôle
Two of the most common measurements in oil and gas, and the ones most often installed wrongly. Covers pressure sensing technologies and gauge,…
Génie électrique
Low and medium voltage switchgear in industrial and oilfield installations. Covers busbars and switchboard construction, circuit breakers and their…
Instrumentation et contrôle
Industrial control system architecture and operation. Covers PLC and DCS hardware and scan cycles, programming languages, HMI and alarm management,…
Génie mécanique
Process piping from specification to leak-free assembly. Covers pipe sizing, schedules and materials, supports and stress, flange types and gaskets,…
Santé, sécurité et environnement (HSE)
How a permit to work system controls high-risk work, and the roles that make it function. Covers permit types, the issue-and-acceptance sequence,…
Santé, sécurité et environnement (HSE)
Keeping equipment capable of doing its safety job throughout its life. Covers integrity management systems, risk-based inspection, maintenance…
Santé, sécurité et environnement (HSE)
Assessing and authorising change before it is made, so that improvements do not introduce hazards. Covers what counts as a change, technical,…
Santé, sécurité et environnement (HSE)
Isolating hazardous energy so that equipment cannot start or release while people work on it. Covers all energy types, isolation standards and…
Santé, sécurité et environnement (HSE)
A semi-quantitative method for deciding whether the protection around a hazardous scenario is enough. Covers initiating event frequency, independent…
Instrumentation et contrôle
The starting point for instrument technicians and anyone who works with process measurement. Covers measurement terminology and error, signal…
Génie mécanique
The valves that make up a process plant: gate, globe, ball, butterfly, plug, check and relief. Covers how each type works and where it belongs,…
Santé, sécurité et environnement (HSE)
The hazard and operability study explained for engineers and operations staff joining their first HAZOP. Covers nodes, parameters and guidewords,…
Santé, sécurité et environnement (HSE)
Running a hazard identification workshop that finds real hazards rather than filling a register. Covers guideword-driven study, assembling the right…
Génie électrique
Generation and standby power for remote and industrial sites. Covers synchronous generator principles, excitation and governing, synchronising and…
Instrumentation et contrôle
Flow measurement from orifice plates to Coriolis meters, and the metering systems that determine what a field is paid. Covers differential pressure,…
Santé, sécurité et environnement (HSE)
Working safely below ground level: locating buried services, preventing collapse, controlling access and managing water, spoil and plant around the…
Santé, sécurité et environnement (HSE)
Holding and complying with environmental permits and consents. Covers permit types and conditions, best available techniques, building a compliance…
Santé, sécurité et environnement (HSE)
Reducing energy consumption systematically rather than opportunistically. Covers the ISO 50001 framework, energy review and significant energy uses,…
Santé, sécurité et environnement (HSE)
Building an emergency plan people can actually follow under pressure. Covers scenario selection, command structure and roles, alerting and…
Santé, sécurité et environnement (HSE)
Recognising and avoiding electrical hazards for anyone working around electrical equipment. Covers shock and arc flash, safe systems of work and…
Génie électrique
Protective relaying for industrial power systems. Covers fault types and fault level, instrument transformers, overcurrent and earth fault grading,…
Génie électrique
Cable selection, installation and proving for industrial and hazardous area installations. Covers construction and insulation types, sizing for…
Génie électrique
Induction and synchronous motors in industrial service. Covers how motors produce torque, nameplate data and duty ratings, starting methods,…
Génie électrique
Earthing systems for industrial and oilfield installations. Covers why systems are earthed, earth electrode design and soil resistivity, step and…
Instrumentation et contrôle
The final control element, where most loop performance is won or lost. Covers valve bodies and trim, flow characteristics and sizing, actuators and…
Santé, sécurité et environnement (HSE)
Recognising a confined space, controlling entry, and being able to get someone out. Covers atmospheric hazards and gas testing, isolation and…
Génie mécanique
How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and…
Santé, sécurité et environnement (HSE)
Measuring and reducing greenhouse gas emissions credibly. Covers the greenhouse gases and their potencies, organisational boundaries, scopes 1, 2 and…
Instrumentation et contrôle
The discipline behind trustworthy measurement. Covers traceability and uncertainty, test equipment selection, calibration procedures for pressure,…
Santé, sécurité et environnement (HSE)
Building bow-tie diagrams that make barriers, threats and consequences visible to everyone from the boardroom to the workface. Covers hazard and top…
Génie mécanique
Rolling element and plain bearings, how they carry load, and why lubrication decides their life. Covers bearing types and selection, grease and oil…
Génie électrique
The supplies that keep control, protection and safety systems alive. Covers battery chemistries and characteristics, charging regimes, DC…
Santé, sécurité et environnement (HSE)
Deciding how much risk reduction is enough, and recording the decision so it stands up. Covers the tolerability triangle, gross disproportion,…
Santé, sécurité et environnement (HSE)
Controlling emissions to atmosphere from combustion, process and fugitive sources. Covers pollutants and their effects, permits and emission limits,…
Ressources humaines
This course provides a comprehensive roadmap for identifying and developing future leaders within your organization.
Management et leadership
This course is designed to provide participants with the knowledge and skills needed to effectively manage multi-shift operations.
Santé, sécurité et environnement (HSE)
Learn to develop, implement, and manage an effective Safety Management System (SMS) to systematically manage safety risks.
Santé, sécurité et environnement (HSE)
Develop a comprehensive Emergency Response Plan (ERP) to effectively manage and respond to workplace emergencies.
Santé, sécurité et environnement (HSE)
Understand, implement, and manage a formal Permit to Work (PTW) system for controlling high-risk activities.
Santé, sécurité et environnement (HSE)
Learn how to effectively manage the health and safety of contractors working on your site.
