Fabrication chimique et transformation pétrochimique.
Cours
74
Compétences
0
Santé, sécurité et environnement (HSE)
A practical course on the US OSHA Laboratory Standard, 29 CFR 1910.1450, for laboratory managers, chemical hygiene officers, principal investigators,…
Santé, sécurité et environnement (HSE)
An eight-hour annual refresher aligned with the OSHA HAZWOPER standard (29 CFR 1910.120 and 1926.65), for site workers and supervisors who have…
Pétrole et gaz
Follows on from Supply Chain Management, for people who run or depend on the store at an oil and gas site. Learn how to catalogue MRO material,…
Santé, sécurité et environnement (HSE)
Awareness training aligned with the OSHA Hazard Communication Standard (29 CFR 1910.1200) and its construction counterpart, for anyone who handles or…
Santé, sécurité et environnement (HSE)
Practical training for EHS coordinators, environmental staff and supervisors at US facilities that generate hazardous waste, aligned with the federal…
Santé, sécurité et environnement (HSE)
Awareness training aligned with the US DOT Hazardous Materials Regulations (49 CFR Parts 171–180) for shipping and receiving staff, warehouse…
Santé, sécurité et environnement (HSE)
The next step after BCSP ASP Exam Preparation: independent preparation for the Certified Safety Professional (CSP) examination of the Board of…
Génie mécanique
Independent exam preparation for the API 653 Aboveground Storage Tank Inspector certification, covering tank inspection intervals, shell and bottom…
Génie mécanique
Independent exam preparation for the API 570 Authorized Piping Inspector examination: it is not affiliated with or endorsed by the American Petroleum…
Génie mécanique
Independent preparation for the API 510 Authorized Pressure Vessel Inspector exam, for inspectors and integrity engineers in refineries, gas plants…
Pétrole et gaz
A practical introduction to running an oil, gas or petrochemical process plant for new and developing field operators, control room operators and…
Pétrole et gaz
How an upstream production facility turns the mixed fluids from a well into export-quality oil, gas and clean water, for new operators, technicians,…
Pétrole et gaz
An introduction to hydrogen for oil and gas, refining and petrochemical engineers, operators, HSE and commercial staff who are moving into hydrogen…
Pétrole et gaz
Take Oil and Gas Processing Fundamentals first. This course is for process operators, process and production engineers and technicians on gas plants…
Gestion de projet
How oil, gas and industrial capital projects are delivered through engineering, procurement and construction, for engineers, project, contract,…
Instrumentation et contrôle
A practical course on protecting industrial control systems for instrument and control engineers, automation engineers, OT and IT staff, and…
Génie mécanique
A practical course for integrity, inspection, maintenance and process staff on oil and gas and process facilities. It covers how corrosion works and…
Pétrole et gaz
A practical course for commissioning, completions, construction, operations and project staff on oil, gas and process projects, covering the path…
Santé, sécurité et environnement (HSE)
A beginner course on carbon capture, utilisation and storage for oil and gas engineers, geoscientists, project, HSE and commercial staff, and…
Santé, sécurité et environnement (HSE)
The advanced follow-on to Contractor HSE Management, for HSE managers, contract holders, company site representatives, contracts leads and auditors…
Santé, sécurité et environnement (HSE)
Managing water as a resource and effluent as a controlled discharge. Covers water balance and reduction, drainage systems, trade effluent consents…
Santé, sécurité et environnement (HSE)
A structured incident analysis method that traces failed barriers back to organisational latent conditions. Covers the trio and the tree, immediate…
Instrumentation et contrôle
Thermocouples, resistance thermometers and non-contact measurement in process service. Covers the physics of each sensor type, thermowells and…
Santé, sécurité et environnement (HSE)
Preventing releases to ground and water, and responding effectively when one occurs. Covers storage and containment, high-risk operations like…
Instrumentation et contrôle
Functional safety for process plant. Covers layers of protection, safety instrumented functions and SIL, the safety lifecycle, hardware architecture…
Santé, sécurité et environnement (HSE)
Identifying the equipment and systems that prevent or limit major accidents, and defining what each must actually do. Covers SCE identification from…
Santé, sécurité et environnement (HSE)
Selecting, fitting and maintaining respiratory protective equipment so that it actually protects. Covers filtering versus supplied-air devices,…
Pétrole et gaz
What happens to crude oil after it leaves the field. Covers crude assay and distillation, conversion and treating processes, product specifications…
Santé, sécurité et environnement (HSE)
Preventing major accidents rather than personal injuries. Covers the difference between process and personal safety, the elements of a process safety…
Santé, sécurité et environnement (HSE)
Measuring whether major accident defences are actually working. Covers the tiered process safety event framework, leading indicators tied to…
Instrumentation et contrôle
Feedback control from first principles to a tuned, stable loop. Covers process dynamics and gain, the PID algorithm and what each term actually does,…
Génie mécanique
Separators, drums, columns and exchangers in oil and gas service. Covers vessel design and construction, internals and separation, exchanger types…
Instrumentation et contrôle
Two of the most common measurements in oil and gas, and the ones most often installed wrongly. Covers pressure sensing technologies and gauge,…
Santé, sécurité et environnement (HSE)
The last check before hazardous material is introduced. Covers when a PSSR is required, building a review that verifies rather than confirms, punch…
Génie mécanique
Pumps that move a fixed volume per stroke or revolution, and why they behave nothing like centrifugal pumps. Covers reciprocating and rotary types,…
Instrumentation et contrôle
Industrial control system architecture and operation. Covers PLC and DCS hardware and scan cycles, programming languages, HMI and alarm management,…
Génie mécanique
Process piping from specification to leak-free assembly. Covers pipe sizing, schedules and materials, supports and stress, flange types and gaskets,…
Santé, sécurité et environnement (HSE)
How a permit to work system controls high-risk work, and the roles that make it function. Covers permit types, the issue-and-acceptance sequence,…
Santé, sécurité et environnement (HSE)
The discipline of anticipating, recognising, evaluating and controlling workplace health hazards. Covers exposure limits and how to read them,…
Génie mécanique
How mechanical seals work, why they fail, and how to select and support them. Covers seal construction and the fluid film, single and dual…
Santé, sécurité et environnement (HSE)
Keeping equipment capable of doing its safety job throughout its life. Covers integrity management systems, risk-based inspection, maintenance…
Santé, sécurité et environnement (HSE)
Assessing and authorising change before it is made, so that improvements do not introduce hazards. Covers what counts as a change, technical,…
Santé, sécurité et environnement (HSE)
Why process material escapes, and what to do about it. Covers containment integrity and degradation mechanisms, the leading causes of LOPC events,…
Santé, sécurité et environnement (HSE)
Turning investigation findings into organisational change that lasts. Covers why lessons are not learned, writing and distributing alerts people…
Santé, sécurité et environnement (HSE)
A semi-quantitative method for deciding whether the protection around a hazardous scenario is enough. Covers initiating event frequency, independent…
Instrumentation et contrôle
The starting point for instrument technicians and anyone who works with process measurement. Covers measurement terminology and error, signal…
Génie mécanique
The valves that make up a process plant: gate, globe, ball, butterfly, plug, check and relief. Covers how each type works and where it belongs,…
Santé, sécurité et environnement (HSE)
Controlling welding, cutting, grinding and any other ignition source in a workplace where flammables may be present. Covers gas testing, the fire…
Santé, sécurité et environnement (HSE)
The hazard and operability study explained for engineers and operations staff joining their first HAZOP. Covers nodes, parameters and guidewords,…
Santé, sécurité et environnement (HSE)
Running a hazard identification workshop that finds real hazards rather than filling a register. Covers guideword-driven study, assembling the right…
Santé, sécurité et environnement (HSE)
Controlling substances hazardous to health, from inventory through assessment to verified control. Covers GHS classification and labelling, reading a…
Santé, sécurité et environnement (HSE)
Classifying areas where flammable atmospheres may occur, and controlling ignition sources within them. Covers zones for gases and dusts, gas groups…
Santé, sécurité et environnement (HSE)
Using portable and fixed gas detection correctly and responding to what it tells you. Covers sensor technologies and their limits, bump testing and…
Génie mécanique
Centrifugal and reciprocating compressors in oilfield and process service. Covers compression principles, machine types and their duty, surge and…
Instrumentation et contrôle
Flow measurement from orifice plates to Coriolis meters, and the metering systems that determine what a field is paid. Covers differential pressure,…
Santé, sécurité et environnement (HSE)
Storing, dispensing and transferring flammable liquids without creating a fire or explosion. Covers flash point and vapour behaviour, storage…
Instrumentation et contrôle
Detection and alarm systems for hydrocarbon facilities. Covers flammable and toxic gas detection technologies, flame and smoke detection, detector…
Santé, sécurité et environnement (HSE)
Getting everyone out and knowing that you have. Covers evacuation strategies, the role of fire marshals, muster point selection, personnel…
Santé, sécurité et environnement (HSE)
Holding and complying with environmental permits and consents. Covers permit types and conditions, best available techniques, building a compliance…
Santé, sécurité et environnement (HSE)
Building an emergency plan people can actually follow under pressure. Covers scenario selection, command structure and roles, alerting and…
Santé, sécurité et environnement (HSE)
Designing, running and learning from exercises that genuinely test a response capability. Covers the ladder from seminar to full-scale exercise,…
Instrumentation et contrôle
The final control element, where most loop performance is won or lost. Covers valve bodies and trim, flow characteristics and sizing, actuators and…
Santé, sécurité et environnement (HSE)
Managing the safety of work done by other organisations on your behalf. Covers prequalification and selection, specifying HSE requirements in…
Santé, sécurité et environnement (HSE)
Recognising a confined space, controlling entry, and being able to get someone out. Covers atmospheric hazards and gas testing, isolation and…
Génie mécanique
How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and…
Instrumentation et contrôle
The discipline behind trustworthy measurement. Covers traceability and uncertainty, test equipment selection, calibration procedures for pressure,…
Santé, sécurité et environnement (HSE)
Building bow-tie diagrams that make barriers, threats and consequences visible to everyone from the boardroom to the workface. Covers hazard and top…
Santé, sécurité et environnement (HSE)
Deciding how much risk reduction is enough, and recording the decision so it stands up. Covers the tolerability triangle, gross disproportion,…
Santé, sécurité et environnement (HSE)
Controlling emissions to atmosphere from combustion, process and fugitive sources. Covers pollutants and their effects, permits and emission limits,…
Santé, sécurité et environnement (HSE)
Develop a comprehensive Emergency Response Plan (ERP) to effectively manage and respond to workplace emergencies.
Santé, sécurité et environnement (HSE)
Understand, implement, and manage a formal Permit to Work (PTW) system for controlling high-risk activities.
Santé, sécurité et environnement (HSE)
Essential training for personnel working in environments with potential exposure to Hydrogen Sulfide (H2S) gas.
Santé, sécurité et environnement (HSE)
Explore best practices in risk management and the application of modern technology to improve safety performance.
Santé, sécurité et environnement (HSE)
A 40-hour, five-day classroom and hands-on course for general site workers at US hazardous waste sites. It is aligned with the initial training in OSHA 29 CFR 1910.120 (HAZWOPER).
