Pressure Vessels and Heat Exchangers
Separators, drums, columns and exchangers in oil and gas service. Covers vessel design and construction, internals and separation, exchanger types and thermal performance, fouling, and the inspection and integrity management that keeps static equipment safe.
- Modules
- 7
- Participants max.
- 20
- Langue
- EN
Ce qu'elle couvre habituellement
- 1
Orientation and Foundations
- Static Equipment on a Process Site
- Pressure, Stress and Wall Thickness
- Reading the Nameplate and Data Book
- Codes, Standards and Duties
- 2
Pressure Vessels
- Vessel Design and Construction
- Separators and Internals
- Separator Capacity and Operating Limits
- Level Control, Interface and Upsets
- Overpressure and Vacuum Protection in Practice
- 3
Heat Exchangers
- Exchanger Types
- Performance, Fouling and Cleaning
- Duty, LMTD and the Heat Transfer Coefficient
- Tube Leaks: Detection, Testing and Plugging
- Air Coolers and Plate Exchangers in Service
- 4
Operating Vessels and Exchangers Safely
- Start-Up, Shutdown and Thermal Stress
- Brittle Fracture and Rapid Depressurisation
- Preparing Vessels for Entry and Opening
- Pressure Testing Safely
- 5
Integrity and Inspection
- Damage Mechanisms
- Inspection, Assessment and Repair
- Corrosion Rate, Remaining Life and Inspection Intervals
- Corrosion Under Insulation and External Integrity
- 6
Applying It: Cases and Decisions
- Case Study: Carryover from a Production Separator
- Case Study: An Exchanger Losing Duty
- Case Study: Local Thinning Found at Inspection
- Managing Change: Re-Rating and Change of Service
- 7
Consolidation and Next Steps
- Integrity Operating Windows
- The Complete Picture: Design, Operation and Inspection
- Common Mistakes and Their Fixes
- Your Competence Checklist and Next Steps
Cette page décrit ce que la formation couvre habituellement. Chaque prestataire de formation peut modifier le contenu, la durée et l'ordre pour s'adapter au groupe. Confirmez le contenu final avec le prestataire de formation avant de réserver.
Vous préférez apprendre à votre rythme ?
Le même sujet en cours en ligne, à commencer dès aujourd'hui.

Appareils à pression et échangeurs de chaleur
5 h 56 min
Autres cours : Génie mécanique
Autres cours avec un formateur dans le même domaine.
Avis
Ce que les apprenants disent de Pressure Vessels and Heat Exchangers.
Pas encore d'avis
Soyez la première personne à dire ce que vous avez pensé de Pressure Vessels and Heat Exchangers.
Connectez-vous pour en rédiger un. Nous vérifions chaque avis avant de l'afficher.
Réserver
Est-ce ce que vous cherchiez ?
Contactez notre équipe pour vérifier la disponibilité du cours et des places dans le lieu de votre choix
Réserver


