Логотип iCompetent
В классе · С преподавателемMechanical EngineeringСреднийСертификат

Corrosion Management and Inspection

A practical course for integrity, inspection, maintenance and process staff on oil and gas and process facilities. It covers how corrosion works and the forms it takes, including CO2, H2S and oxygen corrosion; how to calculate corrosion rates, remaining life and corrosion allowance; and how coatings, cathodic protection, chemical treatment, monitoring and inspection are combined in a corrosion management system. It also covers risk-based inspection, the API inspection codes and fitness-for-service, and how to manage findings through to close-out.

Модули
7
Макс. участников
20
Язык
EN

Что обычно входит

  1. 1

    Why Corrosion Matters and How It Works

    • Corrosion, Cost and Loss of Containment
    • The Electrochemical Corrosion Cell
    • Oxidation and Reduction Reactions in Practice
    • Factors That Control Corrosion Rate
    • Corrosion Rate Units and Measuring Metal Loss
  2. 2

    Forms of Corrosion: Metal Loss

    • Uniform Corrosion and Pitting
    • Crevice and Galvanic Corrosion
    • Erosion-Corrosion and Under-Deposit Corrosion
    • Corrosion Under Insulation (CUI)
    • Microbiologically Influenced Corrosion (MIC)
  3. 3

    Cracking and Oil and Gas Environments

    • Stress Corrosion Cracking and Chloride SCC
    • CO2 (Sweet) Corrosion
    • H2S Sour Service: SSC, HIC and SOHIC
    • Materials for Sour Service: NACE MR0175/ISO 15156
    • Oxygen Corrosion in Water Injection Systems
  4. 4

    Corrosion Rates, Remaining Life and the Corrosion Management System

    • Calculating Corrosion Rates from Thickness Data
    • Remaining Life and Inspection Intervals
    • Corrosion Allowance and Inhibitor Availability
    • The Corrosion Management System
    • Corrosion Risk Assessment and Barriers
    • Corrosion KPIs and the Review Cycle
  5. 5

    Prevention and Control Barriers

    • Materials Selection for Corrosion Control
    • Protective Coatings: Preparation, Systems and Inspection
    • Cathodic Protection: Sacrificial and Impressed Current
    • Cathodic Protection Surveys in Principle
    • Chemical Treatment: Inhibitors, Biocides and Scavengers
    • Process Control as a Corrosion Barrier
  6. 6

    Corrosion Monitoring and Inspection Techniques

    • Intrusive Monitoring: Coupons, ER and LPR Probes
    • Water Chemistry, Iron Counts and Bacteria Monitoring
    • Intelligent Pigging of Pipelines
    • Visual and Ultrasonic Inspection
    • Radiography and Surface Crack Methods
    • Guided Wave and CUI Screening Techniques
  7. 7

    Inspection Planning, Evaluation and Anomaly Management

    • Risk-Based Inspection: API RP 580 and API RP 581
    • Inspection Codes: API 510, API 570 and API 653
    • Fitness-for-Service: API 579-1/ASME FFS-1
    • Repair Options for Corroded Equipment
    • Data, Records and Anomaly Management
    • Putting It Together: From Finding to Close-Out

На этой странице описано, что обычно входит в обучение. Каждый провайдер обучения может менять содержание, продолжительность и порядок тем под конкретную группу. Перед бронированием уточните окончательное содержание у провайдера обучения.

Код
Тип
В классе
Модули
7
Уровень
Средний
Язык
EN
Макс. участников
20
Сертификат
Да
Оценка
Нет

Удобнее учиться в своём темпе?

Та же тема в онлайн-курсе, который можно начать сегодня.

Ещё в категории «Машиностроение»

Другие курсы с тренером по той же теме.

Отзывы

Что говорят учащиеся о курсе «Corrosion Management and Inspection».

Отзывов пока нет

Расскажите первыми, как это было: Corrosion Management and Inspection.

Войдите, чтобы написать отзыв. Мы проверяем каждый отзыв перед публикацией.

Записаться

Это то, что вы искали?

Свяжитесь с нами, чтобы уточнить наличие курса и мест в нужном вам городе

Записаться
Image for the book now section

Запросить расчёт