Total Productive Maintenance (TPM) and OEE
A practical course for maintenance and production supervisors, engineers and reliability staff on total productive maintenance (TPM) and overall equipment effectiveness (OEE). Learn to measure the six big losses, calculate OEE and TEEP correctly and avoid the ways the figure misleads, run autonomous maintenance with operators safely, and plan a TPM pilot with the other pillars. It is awareness and practitioner training and does not award any TPM certificate or award.
- Модули
- 7
- Макс. участников
- 20
- Язык
- EN
Что обычно входит
- 1
Orientation: What TPM Is and Why It Matters
- What Total Productive Maintenance Is
- Where TPM Came From
- Losses, Deterioration and Ownership: The TPM Way of Thinking
- How TPM Fits with Maintenance Strategy, Reliability and Lean
- 2
The Six Big Losses
- From Calendar Time to Fully Productive Time
- Availability Losses: Breakdowns and Setups
- Performance Losses: Minor Stops and Reduced Speed
- Quality Losses: Process Defects and Start-up Rejects
- Recording Losses on the Shop Floor
- 3
Calculating OEE
- OEE Definitions: Planned Production Time, Run Time, Ideal Cycle Time and Good Count
- Availability, Performance and Quality, Step by Step
- The Simple Formula and the Cross-Check
- Mixed Products and Different Cycle Times
- TEEP and Loading
- 4
Using OEE Well
- Benchmarks and the "World-Class" Figure
- How OEE Gets Gamed
- Comparing Lines and Sites
- From OEE to Action: Loss Trees and Pareto Charts
- MTBF and MTTR on the Shop Floor
- 5
The TPM Pillars
- The Pillar Model as It Is Commonly Taught
- Focused Improvement
- Planned Maintenance within TPM
- Quality Maintenance
- Early Equipment Management
- Training, Safety and Office TPM
- 6
Autonomous Maintenance
- The Seven Steps of Autonomous Maintenance
- Initial Cleaning Is Inspection
- Tagging Abnormalities
- Contamination Sources and Cleaning, Inspection and Lubrication Standards
- Safety When Operators Touch Equipment
- The Operator–Maintenance Partnership
- 7
Implementing TPM
- The Steering Group and the Master Plan
- Choosing Pilot Equipment
- Measuring Progress: Beyond the OEE Figure
- Case: A TPM Pilot on a Packing Line
- Sustaining TPM and Next Steps
На этой странице описано, что обычно входит в обучение. Каждый провайдер обучения может менять содержание, продолжительность и порядок тем под конкретную группу. Перед бронированием уточните окончательное содержание у провайдера обучения.
Удобнее учиться в своём темпе?
Та же тема в онлайн-курсе, который можно начать сегодня.

Total Productive Maintenance (TPM) and OEE
7 ч 12 мин
Ещё в категории «Машиностроение»
Другие курсы с тренером по той же теме.
Отзывы
Что говорят учащиеся о курсе «Total Productive Maintenance (TPM) and OEE».
Отзывов пока нет
Расскажите первыми, как это было: Total Productive Maintenance (TPM) and OEE.
Войдите, чтобы написать отзыв. Мы проверяем каждый отзыв перед публикацией.
Записаться
Это то, что вы искали?
Свяжитесь с нами, чтобы уточнить наличие курса и мест в нужном вам городе
Записаться


