Логотип iCompetent
3D-симуляцияБесплатноVehiclesEnglish

3D Exploration Simulation | 6×4 Prime Mover (Tractor Unit)

Explore a 6x4 prime mover (tractor unit) in 3D in the yard. It is built to ISO 7638-1 (ABS/EBS electrical connector, 24 V), ISO 12098 (15-pole lighting connector, 24 V), and ISO 1185 (7-pole 24N connector). Open every part and find the fifth wheel's locking jaws, the release handle and safety lock, red and yellow air lines, the ABS or EBS cable and socket, a spring brake chamber and the air tanks that feed it, blind-spot mirrors, cab steps, grab handles, and wheel chocks. Press Finish exploring when you are done.

Задания
10 заданий
Языки
English
Сохраняется
Внутри курса

Попробуйте здесь

Симуляции предназначены для ознакомления и практики. Они не заменяют практическое обучение и практическую оценку компетентным специалистом.

Что вы будете делать

  1. 1Open every part of the prime mover
  2. 2Find the fifth wheel's locking jaws
  3. 3Find the release handle and the safety lock that holds it in
  4. 4Find the red and the yellow air lines
  5. 5Find the ABS or EBS cable and the socket it plugs into
  6. 6Find a spring brake chamber and the air tanks that feed it
  7. 7Find the blind-spot mirrors
  8. 8Find the cab steps and the grab handles
  9. 9Find the wheel chocks
  10. 10Press Finish exploring when you are done

10 заданий · На английском

Создано по

  • ISO 7638-1 (ABS/EBS electrical connector, 24 V)

Соответствует этим документам; не утверждено организациями, которые их выпустили.

Отзывы

Что говорят учащиеся о курсе «3D Exploration Simulation | 6×4 Prime Mover (Tractor Unit)».

Отзывов пока нет

Расскажите первыми, как это было: 3D Exploration Simulation | 6×4 Prime Mover (Tractor Unit).

Сначала войдите и завершите одно прохождение. Мы проверяем каждый отзыв перед публикацией.

Для команд

Ваша площадка, ваше оборудование, ваши процедуры

Демонстрации работают на тех же движках, что мы создаём для клиентов. Расскажите нам о задаче — мы её сделаем, а вы проверите каждый этап.