Chemical manufacturing and petrochemical processing.
Courses
62
Skills
0
Health, Safety & Environment
Awareness training aligned with the OSHA Hazard Communication Standard (29 CFR 1910.1200) and its construction counterpart, for anyone who handles or…
Health, Safety & Environment
Practical training for EHS coordinators, environmental staff and supervisors at US facilities that generate hazardous waste, aligned with the federal…
Health, Safety & Environment
Awareness training aligned with the US DOT Hazardous Materials Regulations (49 CFR Parts 171–180) for shipping and receiving staff, warehouse…
Health, Safety & Environment
The next step after BCSP ASP Exam Preparation: independent preparation for the Certified Safety Professional (CSP) examination of the Board of…
Mechanical Engineering
Independent exam preparation for the API 653 Aboveground Storage Tank Inspector certification, covering tank inspection intervals, shell and bottom…
Mechanical Engineering
Independent exam preparation for the API 570 Authorized Piping Inspector examination: it is not affiliated with or endorsed by the American Petroleum…
Mechanical Engineering
Independent preparation for the API 510 Authorized Pressure Vessel Inspector exam, for inspectors and integrity engineers in refineries, gas plants…
Health, Safety & Environment
The advanced follow-on to Contractor HSE Management, for HSE managers, contract holders, company site representatives, contracts leads and auditors…
Health, Safety & Environment
Managing water as a resource and effluent as a controlled discharge. Covers water balance and reduction, drainage systems, trade effluent consents…
Health, Safety & Environment
A structured incident analysis method that traces failed barriers back to organisational latent conditions. Covers the trio and the tree, immediate…
Instrumentation & Control
Thermocouples, resistance thermometers and non-contact measurement in process service. Covers the physics of each sensor type, thermowells and…
Health, Safety & Environment
Preventing releases to ground and water, and responding effectively when one occurs. Covers storage and containment, high-risk operations like…
Instrumentation & Control
Functional safety for process plant. Covers layers of protection, safety instrumented functions and SIL, the safety lifecycle, hardware architecture…
Health, Safety & Environment
Identifying the equipment and systems that prevent or limit major accidents, and defining what each must actually do. Covers SCE identification from…
Health, Safety & Environment
Selecting, fitting and maintaining respiratory protective equipment so that it actually protects. Covers filtering versus supplied-air devices,…
Oil & Gas
What happens to crude oil after it leaves the field. Covers crude assay and distillation, conversion and treating processes, product specifications…
Health, Safety & Environment
Preventing major accidents rather than personal injuries. Covers the difference between process and personal safety, the elements of a process safety…
Health, Safety & Environment
Measuring whether major accident defences are actually working. Covers the tiered process safety event framework, leading indicators tied to…
Instrumentation & Control
Feedback control from first principles to a tuned, stable loop. Covers process dynamics and gain, the PID algorithm and what each term actually does,…
Mechanical Engineering
Separators, drums, columns and exchangers in oil and gas service. Covers vessel design and construction, internals and separation, exchanger types…
Instrumentation & Control
Two of the most common measurements in oil and gas, and the ones most often installed wrongly. Covers pressure sensing technologies and gauge,…
Health, Safety & Environment
The last check before hazardous material is introduced. Covers when a PSSR is required, building a review that verifies rather than confirms, punch…
Mechanical Engineering
Pumps that move a fixed volume per stroke or revolution, and why they behave nothing like centrifugal pumps. Covers reciprocating and rotary types,…
Instrumentation & Control
Industrial control system architecture and operation. Covers PLC and DCS hardware and scan cycles, programming languages, HMI and alarm management,…
Mechanical Engineering
Process piping from specification to leak-free assembly. Covers pipe sizing, schedules and materials, supports and stress, flange types and gaskets,…
Health, Safety & Environment
How a permit to work system controls high-risk work, and the roles that make it function. Covers permit types, the issue-and-acceptance sequence,…
Health, Safety & Environment
The discipline of anticipating, recognising, evaluating and controlling workplace health hazards. Covers exposure limits and how to read them,…
Mechanical Engineering
How mechanical seals work, why they fail, and how to select and support them. Covers seal construction and the fluid film, single and dual…
Health, Safety & Environment
Keeping equipment capable of doing its safety job throughout its life. Covers integrity management systems, risk-based inspection, maintenance…
Health, Safety & Environment
Assessing and authorising change before it is made, so that improvements do not introduce hazards. Covers what counts as a change, technical,…
Health, Safety & Environment
Why process material escapes, and what to do about it. Covers containment integrity and degradation mechanisms, the leading causes of LOPC events,…
Health, Safety & Environment
Turning investigation findings into organisational change that lasts. Covers why lessons are not learned, writing and distributing alerts people…
Health, Safety & Environment
A semi-quantitative method for deciding whether the protection around a hazardous scenario is enough. Covers initiating event frequency, independent…
Instrumentation & Control
The starting point for instrument technicians and anyone who works with process measurement. Covers measurement terminology and error, signal…
Mechanical Engineering
The valves that make up a process plant: gate, globe, ball, butterfly, plug, check and relief. Covers how each type works and where it belongs,…
Health, Safety & Environment
Controlling welding, cutting, grinding and any other ignition source in a workplace where flammables may be present. Covers gas testing, the fire…
Health, Safety & Environment
The hazard and operability study explained for engineers and operations staff joining their first HAZOP. Covers nodes, parameters and guidewords,…
Health, Safety & Environment
Running a hazard identification workshop that finds real hazards rather than filling a register. Covers guideword-driven study, assembling the right…
Health, Safety & Environment
Controlling substances hazardous to health, from inventory through assessment to verified control. Covers GHS classification and labelling, reading a…
Health, Safety & Environment
Classifying areas where flammable atmospheres may occur, and controlling ignition sources within them. Covers zones for gases and dusts, gas groups…
Health, Safety & Environment
Using portable and fixed gas detection correctly and responding to what it tells you. Covers sensor technologies and their limits, bump testing and…
Mechanical Engineering
Centrifugal and reciprocating compressors in oilfield and process service. Covers compression principles, machine types and their duty, surge and…
Instrumentation & Control
Flow measurement from orifice plates to Coriolis meters, and the metering systems that determine what a field is paid. Covers differential pressure,…
Health, Safety & Environment
Storing, dispensing and transferring flammable liquids without creating a fire or explosion. Covers flash point and vapour behaviour, storage…
Instrumentation & Control
Detection and alarm systems for hydrocarbon facilities. Covers flammable and toxic gas detection technologies, flame and smoke detection, detector…
Health, Safety & Environment
Getting everyone out and knowing that you have. Covers evacuation strategies, the role of fire marshals, muster point selection, personnel…
Health, Safety & Environment
Holding and complying with environmental permits and consents. Covers permit types and conditions, best available techniques, building a compliance…
Health, Safety & Environment
Building an emergency plan people can actually follow under pressure. Covers scenario selection, command structure and roles, alerting and…
Health, Safety & Environment
Designing, running and learning from exercises that genuinely test a response capability. Covers the ladder from seminar to full-scale exercise,…
Instrumentation & Control
The final control element, where most loop performance is won or lost. Covers valve bodies and trim, flow characteristics and sizing, actuators and…
Health, Safety & Environment
Managing the safety of work done by other organisations on your behalf. Covers prequalification and selection, specifying HSE requirements in…
Health, Safety & Environment
Recognising a confined space, controlling entry, and being able to get someone out. Covers atmospheric hazards and gas testing, isolation and…
Mechanical Engineering
How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and…
Instrumentation & Control
The discipline behind trustworthy measurement. Covers traceability and uncertainty, test equipment selection, calibration procedures for pressure,…
Health, Safety & Environment
Building bow-tie diagrams that make barriers, threats and consequences visible to everyone from the boardroom to the workface. Covers hazard and top…
Health, Safety & Environment
Deciding how much risk reduction is enough, and recording the decision so it stands up. Covers the tolerability triangle, gross disproportion,…
Health, Safety & Environment
Controlling emissions to atmosphere from combustion, process and fugitive sources. Covers pollutants and their effects, permits and emission limits,…
Health, Safety & Environment
Develop a comprehensive Emergency Response Plan (ERP) to effectively manage and respond to workplace emergencies.
Health, Safety & Environment
Understand, implement, and manage a formal Permit to Work (PTW) system for controlling high-risk activities.
Health, Safety & Environment
Essential training for personnel working in environments with potential exposure to Hydrogen Sulfide (H2S) gas.
Health, Safety & Environment
Explore best practices in risk management and the application of modern technology to improve safety performance.
Health, Safety & Environment
A 40-hour, five-day classroom and hands-on course for general site workers at US hazardous waste sites. It is aligned with the initial training in OSHA 29 CFR 1910.120 (HAZWOPER).