Instructor-led
Classroom
Human Resources
Succession Planning & Talent Management
This course provides a comprehensive roadmap for identifying and developing future leaders within your organization.
- Duration
- 3 days
- Modules
- 5 modules
- Level
- Expert
Industries
Power & Utilities
Power generation, transmission, distribution, water and gas utilities.
Courses
53
Skills
0
Online courses
See them in the catalogue
Free
Health, Safety & Environment
NFPA 70E Arc Flash and Electrical Safe Work Practices
Electrical safe work practices for electricians, maintenance technicians, engineers and supervisors in US facilities: the electrical safety program,…
- Modules
- 7 modules
- Lessons
- 34 lessons
- Duration
- 6h 40m
- Level
- Intermediate
Free
Mechanical Engineering
API 510 Pressure Vessel Inspector Exam Preparation
Independent preparation for the API 510 Authorized Pressure Vessel Inspector exam, for inspectors and integrity engineers in refineries, gas plants…
- Modules
- 9 modules
- Lessons
- 49 lessons
- Duration
- 11h 58m
- Level
- Advanced
Free
Health, Safety & Environment
Working at Height
Preventing falls from height and protecting people below. Covers the avoid-prevent-minimise hierarchy, access equipment selection, fall arrest…
- Modules
- 7 modules
- Lessons
- 33 lessons
- Duration
- 6h 34m
- Level
- Intermediate
Free
Health, Safety & Environment
Water and Effluent Management
Managing water as a resource and effluent as a controlled discharge. Covers water balance and reduction, drainage systems, trade effluent consents…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 51m
- Level
- Intermediate
Free
Mechanical Engineering
Vibration Analysis and Condition Monitoring
Detecting machine faults before they become failures. Covers vibration measurement and units, the frequency spectrum and what each peak means, fault…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 32m
- Level
- Advanced
Free
Electrical Engineering
Variable Speed Drives
Variable frequency drives from first principles to field troubleshooting. Covers the rectifier-DC link-inverter architecture, volts per hertz and…
- Modules
- 7 modules
- Lessons
- 28 lessons
- Duration
- 5h 29m
- Level
- Intermediate
Free
Electrical Engineering
Transformers: Operation and Maintenance
Power and distribution transformers in industrial service. Covers construction and principles, vector groups and tap changers, cooling and loading,…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 49m
- Level
- Intermediate
Free
Instrumentation & Control
Temperature Measurement
Rated 5.0 out of 55.0(1 review)Thermocouples, resistance thermometers and non-contact measurement in process service. Covers the physics of each sensor type, thermowells and…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 52m
- Level
- Intermediate
Free
Mechanical Engineering
Shaft Alignment and Balancing
Two of the highest-return skills in rotating equipment maintenance. Covers misalignment types and their cost, pre-alignment checks including soft…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 57m
- Level
- Intermediate
Free
Instrumentation & Control
Safety Instrumented Systems and SIL
Functional safety for process plant. Covers layers of protection, safety instrumented functions and SIL, the safety lifecycle, hardware architecture…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 26m
- Level
- Advanced
Free
Health, Safety & Environment
Process Safety Management Fundamentals
Preventing major accidents rather than personal injuries. Covers the difference between process and personal safety, the elements of a process safety…
- Modules
- 7 modules
- Lessons
- 31 lessons
- Duration
- 6h 10m
- Level
- Intermediate
Free
Instrumentation & Control
Process Control Loops and PID Tuning
Feedback control from first principles to a tuned, stable loop. Covers process dynamics and gain, the PID algorithm and what each term actually does,…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 21m
- Level
- Advanced
Free
Mechanical Engineering
Pressure Vessels and Heat Exchangers
Separators, drums, columns and exchangers in oil and gas service. Covers vessel design and construction, internals and separation, exchanger types…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 56m
- Level
- Intermediate
Free
Instrumentation & Control
Pressure and Level Measurement
Two of the most common measurements in oil and gas, and the ones most often installed wrongly. Covers pressure sensing technologies and gauge,…
- Modules
- 7 modules
- Lessons
- 31 lessons
- Duration
- 6h 12m
- Level
- Intermediate
Free
Electrical Engineering
Power Distribution and Switchgear
Low and medium voltage switchgear in industrial and oilfield installations. Covers busbars and switchboard construction, circuit breakers and their…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 46m
- Level
- Intermediate
Free
Instrumentation & Control
PLC, DCS and SCADA Systems
Industrial control system architecture and operation. Covers PLC and DCS hardware and scan cycles, programming languages, HMI and alarm management,…
- Modules
- 7 modules
- Lessons
- 31 lessons
- Duration
- 6h 14m
- Level
- Intermediate
Free
Mechanical Engineering
Piping Systems and Joint Integrity
Process piping from specification to leak-free assembly. Covers pipe sizing, schedules and materials, supports and stress, flange types and gaskets,…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 6h
- Level
- Intermediate
Free
Health, Safety & Environment
Permit to Work Essentials
How a permit to work system controls high-risk work, and the roles that make it function. Covers permit types, the issue-and-acceptance sequence,…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 43m
- Level
- Intermediate
Free
Health, Safety & Environment
Mechanical and Asset Integrity
Keeping equipment capable of doing its safety job throughout its life. Covers integrity management systems, risk-based inspection, maintenance…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 24m
- Level
- Advanced
Free
Health, Safety & Environment
Management of Change
Assessing and authorising change before it is made, so that improvements do not introduce hazards. Covers what counts as a change, technical,…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 55m
- Level
- Intermediate
Free
Health, Safety & Environment
Lockout/Tagout and Energy Isolation
Isolating hazardous energy so that equipment cannot start or release while people work on it. Covers all energy types, isolation standards and…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 55m
- Level
- Intermediate
Free
Health, Safety & Environment
Layers of Protection Analysis (LOPA)
A semi-quantitative method for deciding whether the protection around a hazardous scenario is enough. Covers initiating event frequency, independent…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 18m
- Level
- Advanced
Free
Instrumentation & Control
Instrumentation Fundamentals
The starting point for instrument technicians and anyone who works with process measurement. Covers measurement terminology and error, signal…
- Modules
- 6 modules
- Lessons
- 26 lessons
- Duration
- 3h 57m
- Level
- Beginner
Free
Mechanical Engineering
Industrial Valves: Selection and Maintenance
The valves that make up a process plant: gate, globe, ball, butterfly, plug, check and relief. Covers how each type works and where it belongs,…
- Modules
- 6 modules
- Lessons
- 26 lessons
- Duration
- 3h 56m
- Level
- Beginner
Free
Health, Safety & Environment
HAZOP Study Fundamentals
The hazard and operability study explained for engineers and operations staff joining their first HAZOP. Covers nodes, parameters and guidewords,…
- Modules
- 8 modules
- Lessons
- 40 lessons
- Duration
- 8h 47m
- Level
- Advanced
Free
Health, Safety & Environment
HAZID Workshop Facilitation
Running a hazard identification workshop that finds real hazards rather than filling a register. Covers guideword-driven study, assembling the right…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 44m
- Level
- Intermediate
Free
Electrical Engineering
Generators and Emergency Power
Rated 5.0 out of 55.0(1 review)Generation and standby power for remote and industrial sites. Covers synchronous generator principles, excitation and governing, synchronising and…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 36m
- Level
- Advanced
Free
Instrumentation & Control
Flow Measurement and Metering
Flow measurement from orifice plates to Coriolis meters, and the metering systems that determine what a field is paid. Covers differential pressure,…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 27m
- Level
- Advanced
Free
Health, Safety & Environment
Excavation and Ground Disturbance
Working safely below ground level: locating buried services, preventing collapse, controlling access and managing water, spoil and plant around the…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 49m
- Level
- Intermediate
Free
Health, Safety & Environment
Environmental Permitting and Compliance
Holding and complying with environmental permits and consents. Covers permit types and conditions, best available techniques, building a compliance…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 55m
- Level
- Intermediate
Free
Health, Safety & Environment
Energy Management and ISO 50001
Reducing energy consumption systematically rather than opportunistically. Covers the ISO 50001 framework, energy review and significant energy uses,…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 51m
- Level
- Intermediate
Free
Health, Safety & Environment
Emergency Response Planning
Building an emergency plan people can actually follow under pressure. Covers scenario selection, command structure and roles, alerting and…
- Modules
- 7 modules
- Lessons
- 28 lessons
- Duration
- 5h 27m
- Level
- Intermediate
Free
Health, Safety & Environment
Electrical Safety Awareness
Recognising and avoiding electrical hazards for anyone working around electrical equipment. Covers shock and arc flash, safe systems of work and…
- Modules
- 6 modules
- Lessons
- 26 lessons
- Duration
- 3h 52m
- Level
- Beginner
Free
Electrical Engineering
Electrical Protection and Relays
Protective relaying for industrial power systems. Covers fault types and fault level, instrument transformers, overcurrent and earth fault grading,…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 37m
- Level
- Advanced
Free
Electrical Engineering
Electrical Cables, Terminations and Testing
Cable selection, installation and proving for industrial and hazardous area installations. Covers construction and insulation types, sizing for…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 6h
- Level
- Intermediate
Free
Electrical Engineering
Electric Motors and Starters
Induction and synchronous motors in industrial service. Covers how motors produce torque, nameplate data and duty ratings, starting methods,…
- Modules
- 6 modules
- Lessons
- 27 lessons
- Duration
- 3h 58m
- Level
- Beginner
Free
Electrical Engineering
Earthing, Bonding and Lightning Protection
Earthing systems for industrial and oilfield installations. Covers why systems are earthed, earth electrode design and soil resistivity, step and…
- Modules
- 7 modules
- Lessons
- 28 lessons
- Duration
- 5h 32m
- Level
- Intermediate
Free
Instrumentation & Control
Control Valves and Actuators
The final control element, where most loop performance is won or lost. Covers valve bodies and trim, flow characteristics and sizing, actuators and…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 52m
- Level
- Intermediate
Free
Health, Safety & Environment
Confined Space Entry
Recognising a confined space, controlling entry, and being able to get someone out. Covers atmospheric hazards and gas testing, isolation and…
- Modules
- 8 modules
- Lessons
- 42 lessons
- Duration
- 9h 19m
- Level
- Advanced
Free
Mechanical Engineering
Centrifugal Pumps: Operation and Maintenance
How centrifugal pumps work, why they fail, and how to operate and maintain them well. Covers hydraulic principles and the pump curve, NPSH and…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 55m
- Level
- Intermediate
Free
Health, Safety & Environment
Carbon Footprint and GHG Accounting
Measuring and reducing greenhouse gas emissions credibly. Covers the greenhouse gases and their potencies, organisational boundaries, scopes 1, 2 and…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 53m
- Level
- Intermediate
Free
Instrumentation & Control
Calibration and Loop Checking
The discipline behind trustworthy measurement. Covers traceability and uncertainty, test equipment selection, calibration procedures for pressure,…
- Modules
- 6 modules
- Lessons
- 26 lessons
- Duration
- 3h 57m
- Level
- Beginner
Free
Health, Safety & Environment
Bow-Tie Risk Analysis
Building bow-tie diagrams that make barriers, threats and consequences visible to everyone from the boardroom to the workface. Covers hazard and top…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 58m
- Level
- Intermediate
Free
Mechanical Engineering
Bearings and Lubrication
Rolling element and plain bearings, how they carry load, and why lubrication decides their life. Covers bearing types and selection, grease and oil…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 54m
- Level
- Intermediate
Free
Electrical Engineering
Batteries, UPS and DC Systems
The supplies that keep control, protection and safety systems alive. Covers battery chemistries and characteristics, charging regimes, DC…
- Modules
- 7 modules
- Lessons
- 30 lessons
- Duration
- 5h 58m
- Level
- Intermediate
Free
Health, Safety & Environment
ALARP and Risk Acceptance
Deciding how much risk reduction is enough, and recording the decision so it stands up. Covers the tolerability triangle, gross disproportion,…
- Modules
- 8 modules
- Lessons
- 40 lessons
- Duration
- 10h
- Level
- Advanced
Free
Health, Safety & Environment
Air Emissions Management
Controlling emissions to atmosphere from combustion, process and fugitive sources. Covers pollutants and their effects, permits and emission limits,…
- Modules
- 7 modules
- Lessons
- 31 lessons
- Duration
- 6h 15m
- Level
- Intermediate
Classroom and in-house courses
See them in the catalogueInstructor-led
Classroom
Management & Leadership
Organizing Multi-Shifts Operations
This course is designed to provide participants with the knowledge and skills needed to effectively manage multi-shift operations.
- Duration
- 5 days
- Modules
- 5 modules
- Level
- Intermediate
Instructor-led
Classroom
Health, Safety & Environment
Safety Management Systems (SMS)
Learn to develop, implement, and manage an effective Safety Management System (SMS) to systematically manage safety risks.
- Duration
- 5 days
- Modules
- 4 modules
- Level
- Intermediate
Instructor-led
Classroom
Health, Safety & Environment
Emergency Response Planning (ERP)
Develop a comprehensive Emergency Response Plan (ERP) to effectively manage and respond to workplace emergencies.
- Duration
- 3 days
- Modules
- 5 modules
- Level
- Intermediate
Instructor-led
Classroom
Health, Safety & Environment
Permit to Work (PTW) Systems
Understand, implement, and manage a formal Permit to Work (PTW) system for controlling high-risk activities.
- Duration
- 2 days
- Modules
- 4 modules
- Level
- Intermediate
Instructor-led
Classroom
Health, Safety & Environment
Contractor Safety Management
Learn how to effectively manage the health and safety of contractors working on your site.
- Duration
- 2 days
- Modules
- 4 modules
- Level
- Intermediate